SKF E2.629-2Z/C3 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- RS 제품 번호:
- 719-2011
- 제조사 부품 번호:
- E2.629-2Z/C3
- 제조업체:
- SKF
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩11,271.00
재고있음
- 추가로 2026년 6월 08일 부터 7 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 5 | ₩11,271.00 |
| 6 - 24 | ₩10,822.50 |
| 25 + | ₩10,374.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 719-2011
- 제조사 부품 번호:
- E2.629-2Z/C3
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 9mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 26mm | |
| Race Width | 8mm | |
| Cage Material | Non-Metallic | |
| Race Material | Stainless Steel | |
| Ball Material | Steel | |
| End Type | Shielded | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 1.93kN | |
| Dynamic Load Rating | 4.62kN | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Series | 2 Light | |
| Limiting Speed | 36000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| Flange Outside Diameter | 26mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 9mm | ||
Product Type Ball Bearing | ||
Outside Diameter 26mm | ||
Race Width 8mm | ||
Cage Material Non-Metallic | ||
Race Material Stainless Steel | ||
Ball Material Steel | ||
End Type Shielded | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 1.93kN | ||
Dynamic Load Rating 4.62kN | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Series 2 Light | ||
Limiting Speed 36000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
Flange Outside Diameter 26mm | ||
제외
SKF Ball Bearing, Plain Race, Deep Groove, 9mm ID, 26mm OD - E2.629-2Z/C3
Use this ball bearing from SKF to increase the efficiency of your motor. It has a cylindrical shape with a parallel bore to fit over the motor shaft and support axial and radial loads in both directions. The balls are set in a deep groove to deliver smooth movement with minimal friction. This means less heat is generated during use, helping to prolong your machine's lifespan. Thanks to this low-friction design, the ball bearing is suitable for use at higher speeds and works with electric motors up to 37kW.
• Pre-greased units for ease of use
• Shielded on both ends to keep the bearings lubricated and stop dirt getting inside
• Body made from steel for strength and corrosion resistance
• Composite polymer cage reinforced with fibreglass for strength and resistance to chemicals, moisture and wear
Applications
• Food and beverage industries
• HVAC systems
• Chemical and electro-plating processes
• Measurement and instrumentation devices
Why does this ball bearing have a polymer cage?
This bearing comes with a polymer cage to give it good damping and insulation properties. It also helps to keep noise to a minimum.
관련된 링크들
- SKF 629-2Z 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- SKF 629-2Z/C3 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- SKF 629-2RSH 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- FAG 629-C-2Z 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- SKF 629 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- SKF 629-2RSH/C3 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- FAG 629-C-2Z-C3 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- SKF 629/C3 1 Row Ball Bearing - 9 mm ID, 26 mm OD