최근 검색 기록

    SKF Deep Groove Ball Bearing - Plain Race Type, 8mm I.D, 22mm O.D

    RS 제품 번호:
    667-1030
    제조사 부품 번호:
    608-2Z/C3
    제조업체:
    SKF
    SKF
    모든 Ball Bearings 열람하기
    1 홍콩에 재고-결제 확인후 2-3영업일내 국내 도착
    126 <재고있음> 5-9영업일내 홍콩 발송
    401 <재고있음> 5-9영업일내 홍콩 발송
    Add to Basket
    수량

    추가완료!

    단가 Each

    ₩8,631.95

    수량한팩당
    1 - 5₩8,631.95
    6 - 24₩8,390.15
    25 +₩8,044.50
    RS 제품 번호:
    667-1030
    제조사 부품 번호:
    608-2Z/C3
    제조업체:
    SKF

    해당 안됨

    COO (Country of Origin):
    IT

    제정법과 컴플라이언스

    해당 안됨

    COO (Country of Origin):
    IT

    제품 세부 사항

    Deep Groove Metric Ball Bearings - Shielded


    Shielded (2Z) bearings are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter. 2RZ bearings are 2Z bearings fitted with two low friction seals.
    Deep groove ball bearings are versatile and robust in operation, they also require little maintenance. Deep groove ball bearings are the most widely used bearing type due to their simple design and suitability for high speeds.


    Features and Benefits


    • Primarily intended for applications where the bearing inner ring rotates
    • If the outer ring rotates there is a danger that grease may be lost from the bearing at high speeds
    • Both standard and C3 clearance available


    SKF Shielded Deep-Groove Ball Bearing, 8mm ID, 22mm OD - 608-2Z/C3


    This SKF deep-groove ball bearing is a versatile component that accommodates both radial and axial loads. It produces lower levels of friction than many standard ball bearings, reducing the operating temperature and allowing your machinery to operate efficiently at high speeds. Metal shields on both sides of the bearing keep out damaging particles like dust, preventing malfunctions and prolonging the lifespan of the product. This bearing has a static load rating of 1.37kN and a dynamic load rating of 3.45kN, allowing it to support heavy stationary or moving loads.


    • High-quality balls and smooth raceway finish ensure optimal lubrication while limiting vibrations and noise
    • Steel material is robust and resistant to corrosion in harsh environments
    • Limiting speed of 38,000rpm (rotations per minute) for use at high speeds


    Applications


    • Medical imaging equipment
    • Industrial motors and pumps
    • Printing industry


    When should I use C3 ball bearings?


    You should use a C3 ball bearing like this one for high-heat applications. This is because the clearance is greater than normal to allow room for the bearing to expand when subjected to high temperatures.



    사양

    속성
    Inside Diameter8mm
    Outside Diameter22mm
    Ball Bearing TypeDeep Groove
    Race Width7mm
    End TypeShielded
    Number of Rows1
    Static Load Rating1.37kN
    MaterialSteel
    Cage MaterialSteel
    Race TypePlain
    Dynamic Load Rating3.45kN
    Bore TypeParallel
    1 홍콩에 재고-결제 확인후 2-3영업일내 국내 도착
    126 <재고있음> 5-9영업일내 홍콩 발송
    401 <재고있음> 5-9영업일내 홍콩 발송
    Add to Basket
    수량

    추가완료!

    단가 Each

    ₩8,631.95

    수량한팩당
    1 - 5₩8,631.95
    6 - 24₩8,390.15
    25 +₩8,044.50