FAG 6002-C-2Z>V 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- RS 제품 번호:
- 260-0878
- 제조사 부품 번호:
- 6002-C-2Z>V
- 제조업체:
- FAG
Subtotal (1 unit)*
₩9,160.00
재고있음
- 추가로 2026년 10월 05일 부터 41 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩9,160.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 260-0878
- 제조사 부품 번호:
- 6002-C-2Z>V
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Inside Diameter | 15mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 32mm | |
| Race Width | 9mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Static Load Rating | 2.85kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 6.3kN | |
| Series | Generation C | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Limiting Speed | 31500rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Inside Diameter 15mm | ||
Product Type Ball Bearing | ||
Outside Diameter 32mm | ||
Race Width 9mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Static Load Rating 2.85kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 6.3kN | ||
Series Generation C | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Limiting Speed 31500rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
- COO (Country of Origin):
- PT
Schaeffler Generation C Series Ball Bearing, 15mm Inside Diameter, 32mm Outside Diameter - 6002-C-2Z >V
This ball bearing is a single-row deep-groove component designed to support radial loads and enable high-speed rotation in Compact assemblies. It is suited to precision electromechanical systems where a sealed, parallel-bore bearing with measured internal clearance is required for continuous operation across a wide temperature span.
Features & Benefits
• Steel shields prevent contamination while maintaining low friction
• Parallel bore design allows straightforward shaft mounting
• CN internal clearance for predictable axial and radial play
• Dynamic load capacity 6.3 kN for sustained radial loads
• Limiting speed 31,500 r/min for high-speed instrument use
• Closed ends reduce lubricant loss and ingress risk
• Parallel bore design allows straightforward shaft mounting
• CN internal clearance for predictable axial and radial play
• Dynamic load capacity 6.3 kN for sustained radial loads
• Limiting speed 31,500 r/min for high-speed instrument use
• Closed ends reduce lubricant loss and ingress risk
**Applications**
• Suitable for motor shafts in automation equipment
• Ideal for spindle support in Compact rotary encoders
• Used with precision fans in electronics cooling systems
• Can be used for small gearbox radial support
• Suitable for actuator shafts in electrical actuators
• Ideal for spindle support in Compact rotary encoders
• Used with precision fans in electronics cooling systems
• Can be used for small gearbox radial support
• Suitable for actuator shafts in electrical actuators
What materials form the running and cage elements?
The rolling elements are steel with a steel sheet-metal cage to support ball guidance and durability.
How is thermal range handled during operation?
It operates between -20°C and 120°C, allowing use across common industrial ambient and elevated temperatures.
What mounting clearances are relevant for housing shoulders?
Minimum shaft shoulder diameter for mounting is 17 mm and maximum housing shoulder diameter is 30 mm to ensure correct seating.
Which speeds should be used as a reference for continuous service?
Use the reference speed of 23,200 r/min for typical continuous operation and limit operation below 31,500 r/min.
What dimensions determine fillet and chamfer limits during installation?
Maximum fillet radius allowed is 0.3 mm and minimum chamfer dimension is 0.3 mm to prevent interference.
관련된 링크들
- FAG 6002-C-2Z 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C-2Z-C3 1 Row Deep Groove Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C-2HRS 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C-C3 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- SKF 6002-Z 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C-2HRS>V 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- FAG S6002-2RSR-HLC 1 Row Ball Bearing - 15 mm ID, 32 mm OD