제조사부품번호

FAG 6203-C-2HRS>V 1 Row Ball Bearing - 17 mm ID, 40 mm OD

RS 제품 번호:: 260-0875
제조사 부품 번호:: 6203-C-2HRS>V
제조업체:: FAG

FAG 6203-C-2HRS>V 1 Row Ball Bearing - 17 mm ID, 40 mm OD

모든 Ball Bearings 열람하기

Subtotal (1 unit)*

₩11,240.00

재고있음

139 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩11,240.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 260-0875
제조사 부품 번호:: 6203-C-2HRS>V
제조업체:: FAG

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	FAG
	Inside Diameter	17mm
	Product Type	Ball Bearing
	Outside Diameter	40mm
	Race Width	12mm
	Ball Material	Steel
	Cage Material	Steel
	End Type	Closed
	Number of Rows	1
	Static Load Rating	4.75kN
	Internal Clearance	CN
	Dynamic Load Rating	11kN
	Standards/Approvals	No
	Bore Type	Parallel
	Series	Generation C
	Limiting Speed	16900rpm
	Bearing Type	Single Row Deep Groove Ball
	Race Type	Plain

	모두 선택
	브랜드 FAG
	Inside Diameter 17mm
	Product Type Ball Bearing
	Outside Diameter 40mm
	Race Width 12mm
	Ball Material Steel
	Cage Material Steel
	End Type Closed
	Number of Rows 1
	Static Load Rating 4.75kN
	Internal Clearance CN
	Dynamic Load Rating 11kN
	Standards/Approvals No
	Bore Type Parallel
	Series Generation C
	Limiting Speed 16900rpm
	Bearing Type Single Row Deep Groove Ball
	Race Type Plain

제외

COO (Country of Origin):: PT

Schaeffler Generation C Series Ball Bearing, 17mm Inside Diameter, 40mm Outside Diameter - 6203-C-2HRS >V

This ball bearing is a sealed, single‑row deep‑groove component designed to support radial loads in rotating assemblies within automation, electronics and mechanical systems. It is built for Compact installations where a closed‑end bearing with steel cage is required and operates across a moderate temperature range for general industrial environments.

Features & Benefits

• 11 kN dynamic load capacity for sustained radial loads
• 4.75 kN static load capacity for standing or shock loads
• Limiting speed 16,900 r/min for high‑speed rotating equipment
• Steel cage construction for dimensional stability under load

Applications

• Suitable for spindle use in Compact motor assemblies
• Ideal for conveyors and rotary indexing devices
• Used for small electric motors in automation systems
• Can be used in gearboxes requiring sealed radial bearings

What shaft and housing shoulder constraints should I allow for?

Minimum shaft shoulder diameter for full seating is 21.2mm and the maximum housing shoulder diameter is 35.8mm to ensure correct axial location.

What operating temperatures can be expected during use?

The bearing functions between −20°C to 100°C, accommodating typical workshop to light industrial ambient conditions.

How does the bearing handle surface fillets during installation?

Maximum permissible fillet radius at mating shoulders is 0.6mm while the minimum chamfer on mating faces should be 0.6mm to prevent contact with ring edges.

What mass should I account for when calculating rotating inertia?

Individual unit mass is 0.065kg for dynamic balancing and inertia considerations.

Are there recommended ring calibres to check for proper fit?

Outer ring calibre is 34.8mm and inner ring calibre is 22.8mm to verify seating dimensions during assembly.