FAG 61820-2RSR-Y 1 Row Ball Bearing - 100 mm ID, 125 mm OD
- RS 제품 번호:
- 260-0827
- 제조사 부품 번호:
- 61820-2RSR-Y
- 제조업체:
- FAG
Subtotal (1 unit)*
₩303,780.00
재고있음
- 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩303,780.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 260-0827
- 제조사 부품 번호:
- 61820-2RSR-Y
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Inside Diameter | 100mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 125mm | |
| Race Width | 13mm | |
| Cage Material | Steel | |
| Race Material | Steel | |
| Ball Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 22.1kN | |
| Dynamic Load Rating | 21.3kN | |
| Standards/Approvals | No | |
| Series | 618-2RSR-Y | |
| Bore Type | Parallel | |
| Limiting Speed | 2470rpm | |
| Flange Outside Diameter | 125mm | |
| Race Type | Deep Grooved | |
| Bearing Type | Single Row Deep Groove Ball | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Inside Diameter 100mm | ||
Product Type Ball Bearing | ||
Outside Diameter 125mm | ||
Race Width 13mm | ||
Cage Material Steel | ||
Race Material Steel | ||
Ball Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 22.1kN | ||
Dynamic Load Rating 21.3kN | ||
Standards/Approvals No | ||
Series 618-2RSR-Y | ||
Bore Type Parallel | ||
Limiting Speed 2470rpm | ||
Flange Outside Diameter 125mm | ||
Race Type Deep Grooved | ||
Bearing Type Single Row Deep Groove Ball | ||
제외
- COO (Country of Origin):
- SK
Schaeffler 618-2RSR-Y Series Ball Bearing, 100mm Bore Diameter, 125mm Outside Diameter - 61820-2RSR-Y
This ball bearing is a single-row deep-groove component designed for rotating assemblies requiring sealed protection and steel races. It operates across a practical temperature range and is intended for installations where a parallel bore and closed-end configuration are required. The unit is supplied with Seals on each side and a brass sheet-metal cage to assist in contaminant exclusion and internal component retention.
Features and Benefits:
• 21.3kN dynamic load capacity increases operational life
• 22.1kN static load rating maintains positional stability under shock
• Sealed 2RSR design reduces ingress from dust and moisture
• Brass sheet-metal cage improves internal retention during rotation
• Limiting speed 2,470r/min supports lower-speed driven systems
• 22.1kN static load rating maintains positional stability under shock
• Sealed 2RSR design reduces ingress from dust and moisture
• Brass sheet-metal cage improves internal retention during rotation
• Limiting speed 2,470r/min supports lower-speed driven systems
Applications
• Used with gearboxes requiring sealed shaft support
• Suitable for industrial conveyors with moderate radial loads
• Ideal for slow-speed motor shafts in manufacturing equipment
• Can be used for agricultural machinery subject to contamination
• Used for bearing housings needing a parallel-bore fit
• Suitable for industrial conveyors with moderate radial loads
• Ideal for slow-speed motor shafts in manufacturing equipment
• Can be used for agricultural machinery subject to contamination
• Used for bearing housings needing a parallel-bore fit
What shaft shoulder and housing shoulder limits should be observed?
Minimum shaft-shoulder diameter is 104.6mm and maximum housing-shoulder diameter is 120.4mm.
What are the service temperature constraints for this unit?
It is rated to operate between -20°C and 100°C.
What mounting clearances are required on ring shoulders and chamfers?
Minimum chamfer dimension is 1mm and maximum fillet radius allowed is 1mm.
What are the internal fatigue and mass characteristics relevant to selection?
The radial fatigue load limit is 1,250N and the component mass is 330g.
관련된 링크들
- FAG 61820-Y 1 Row Ball Bearing - 100 mm ID, 125 mm OD
- FAG 61820-2RZ-Y 1 Row Ball Bearing - 100 mm ID, 125 mm OD
- FAG 61822-2RSR-Y 1 Row Ball Bearing - 110 mm ID, 140 mm OD
- FAG 61821-2RSR-Y 1 Row Ball Bearing - 105 mm ID, 130 mm OD
- FAG 61818-2RSR-Y 1 Row Ball Bearing - 90 mm ID, 115 mm OD
- FAG 61809-2RSR-Y 1 Row Ball Bearing - 45 mm ID, 58 mm OD
- FAG 61811-2RSR-Y 1 Row Ball Bearing - 55 mm ID, 72 mm OD
- FAG 61815-2RSR-Y 1 Row Ball Bearing - 75 mm ID, 95 mm OD