FAG 61903-2RSR-HLC 1 Row Ball Bearing - 17 mm ID, 30 mm OD
- RS 제품 번호:
- 260-0696
- 제조사 부품 번호:
- 61903-2RSR-HLC
- 제조업체:
- FAG
Subtotal (1 unit)*
₩28,860.00
재고있음
- 27 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩28,860.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 260-0696
- 제조사 부품 번호:
- 61903-2RSR-HLC
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 17mm | |
| Outside Diameter | 30mm | |
| Race Width | 7mm | |
| Race Material | Bearing Steel | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 2.56kN | |
| Dynamic Load Rating | 4.59kN | |
| Series | 619-2RSR | |
| Standards/Approvals | No | |
| Bore Type | Cylindrical | |
| Limiting Speed | 12700rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Flange Outside Diameter | 30mm | |
| Race Type | Deep Groove | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 17mm | ||
Outside Diameter 30mm | ||
Race Width 7mm | ||
Race Material Bearing Steel | ||
Ball Material Steel | ||
Cage Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 2.56kN | ||
Dynamic Load Rating 4.59kN | ||
Series 619-2RSR | ||
Standards/Approvals No | ||
Bore Type Cylindrical | ||
Limiting Speed 12700rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Flange Outside Diameter 30mm | ||
Race Type Deep Groove | ||
제외
Schaeffler 619-2RSR Series Ball Bearing, 30mm Outside Diameter, 17mm Inside Diameter - 61903-2RSR-HLC
This ball bearing is a sealed single-row deep-groove radial bearing designed to support rotational loads in Compact assemblies. It operates across a wide temperature range and is suitable for applications requiring sealed protection and steel construction while maintaining high rotational capability.
Features and Benefits:
• Sealed construction limits contamination and reduces maintenance
• Steel cage offers Durable retention under continuous operation
• Internal clearance CN provides predictable axial and radial play
• Static load capacity 2.56 kN resists high stationary loads
• Dynamic load capacity 4.59 kN supports sustained radial loading
• Limiting speed 12,700 r/min enables high-speed miniature operation
• Steel cage offers Durable retention under continuous operation
• Internal clearance CN provides predictable axial and radial play
• Static load capacity 2.56 kN resists high stationary loads
• Dynamic load capacity 4.59 kN supports sustained radial loading
• Limiting speed 12,700 r/min enables high-speed miniature operation
Applications
• Suitable for precision motor shafts in Compact drives
• Ideal for small gearbox and transmission bearings
• Used with rotary actuators in automation equipment
• Can be used for wheel hubs in lightweight mechanisms
• Appropriate for instrumentation spindles requiring sealed units
• Ideal for small gearbox and transmission bearings
• Used with rotary actuators in automation equipment
• Can be used for wheel hubs in lightweight mechanisms
• Appropriate for instrumentation spindles requiring sealed units
What shaft and housing interfaces are required for correct mounting?
Minimum shaft shoulder diameter must allow a 19 mm seating and housing shoulder must not exceed 28 mm to ensure correct axial seating and ring engagement.
What operating temperatures can be expected without seal compromise?
The bearing functions from −30 °C up to 100 °C while retaining sealing integrity for typical industrial environments.
How should fillet and chamfer dimensions be accommodated during design?
Design fillet radii no larger than 0.3 mm and provide a minimum chamfer depth of 0.3 mm to avoid interference with ring edges.
What is the typical mass to consider in rotating assemblies?
The component mass is 17 g, which should be included when calculating rotor inertia and balance.
Which running clearance and fatigue limit relate to life predictions?
The internal clearance classification CN and a radial fatigue load limit of 150 N are the parameters used for bearing life and endurance calculations.
관련된 링크들
- FAG 61903-HLC 1 Row Deep Groove Ball Bearing - 17 mm ID, 30 mm OD
- FAG 61903-2Z-HLC 1 Row Deep Groove Ball Bearing - 17 mm ID, 30 mm OD
- FAG 61803-2RSR-HLC 1 Row Ball Bearing - 17 mm ID, 26 mm OD
- FAG S6303-2RSR-HLC 2 Row Ball Bearing - 17 mm ID, 47 mm OD
- FAG S6203-2RSR-HLC 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- FAG S6003-2RSR-HLC 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- FAG 61900-2RSR-HLC 1 Row Ball Bearing - 10 mm ID, 22 mm OD
- FAG 61800-2RSR-HLC 1 Row Ball Bearing - 10 mm ID, 19 mm OD