FAG 61900-2Z-HLC 1 Row Ball Bearing - 10 mm ID, 22 mm OD
- RS 제품 번호:
- 260-0693
- 제조사 부품 번호:
- 61900-2Z-HLC
- 제조업체:
- FAG
Subtotal (1 pack of 10 units)*
₩241,280.00
재고있음
- 10 개 단위 배송 준비 완료
- 추가로 2026년 11월 03일 부터 40 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩24,128.00 | ₩241,280.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 260-0693
- 제조사 부품 번호:
- 61900-2Z-HLC
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 10mm | |
| Outside Diameter | 22mm | |
| Race Width | 6mm | |
| Race Material | Bearing Steel | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Static Load Rating | 1.02kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 2.7kN | |
| Bore Type | Cylindrical | |
| Series | 61900-2Z | |
| Standards/Approvals | No | |
| Limiting Speed | 41000rpm | |
| Race Type | Deep Groove | |
| Flange Outside Diameter | 22mm | |
| Bearing Type | Single Row Deep Groove Ball | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 10mm | ||
Outside Diameter 22mm | ||
Race Width 6mm | ||
Race Material Bearing Steel | ||
Ball Material Steel | ||
Cage Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Static Load Rating 1.02kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 2.7kN | ||
Bore Type Cylindrical | ||
Series 61900-2Z | ||
Standards/Approvals No | ||
Limiting Speed 41000rpm | ||
Race Type Deep Groove | ||
Flange Outside Diameter 22mm | ||
Bearing Type Single Row Deep Groove Ball | ||
- COO (Country of Origin):
- JP
Schaeffler 61900-2Z Series Ball Bearing, 22mm Outside Diameter, 10mm Inside Diameter - 61900-2Z-HLC
This ball bearing is a single-row deep-groove component designed to support radial loads and permit high rotational speeds in Compact assemblies. It is intended for applications requiring sealed protection and robust steel construction, operating across a wide temperature range and suited to miniature mechanical systems.
Features and Benefits:
• 41,000 r/min limiting speed enables high-speed rotational performance
• 2.7 kN dynamic load rating sustains cyclic radial loads
• 1.02 kN static load capacity resists shock and standstill forces
• CN internal clearance accommodates thermal and assembly variations
• Steel sheet-metal cage provides structural stability under load
• 2.7 kN dynamic load rating sustains cyclic radial loads
• 1.02 kN static load capacity resists shock and standstill forces
• CN internal clearance accommodates thermal and assembly variations
• Steel sheet-metal cage provides structural stability under load
Applications
• Suitable for precision electric motor spindles
• Ideal for miniature gearbox rotating elements
• Used with small fans and blowers in Compact equipment
• Can be used for rotary encoders and instrumentation shafts
• Suitable for handheld power-tool bearings requiring sealed units
• Ideal for miniature gearbox rotating elements
• Used with small fans and blowers in Compact equipment
• Can be used for rotary encoders and instrumentation shafts
• Suitable for handheld power-tool bearings requiring sealed units
What temperature range can it operate within?
It functions between -30°C and 120°C as specified for operating conditions.
How does the sealing affect maintenance intervals?
The shielded design reduces ingress of contaminants, decreasing lubrication refresh frequency.
What shaft and housing shoulder dimensions are required for proper mounting?
Minimum shaft shoulder diameter is 12 mm and maximum housing shoulder diameter is 20 mm.
What are the recommended fillet and chamfer allowances for installation?
Maximum fillet radius on shoulders is 0.3 mm and minimum chamfer depth required is 0.3 mm.
What reference speed should be considered for sustained operation?
Use the 27,000 r/min reference speed for continuous-duty calculations.
관련된 링크들
- FAG 61900-2RSR-HLC 1 Row Ball Bearing - 10 mm ID, 22 mm OD
- SKF 61900-2Z 1 Row Ball Bearing - 10 mm ID, 22 mm OD
- FAG 686-2Z-HLC 1 Row Ball Bearing - 6 mm ID, 13 mm OD
- FAG 688-2Z-HLC 1 Row Ball Bearing - 8 mm ID, 16 mm OD
- FAG 697-2Z-HLC 1 Row Ball Bearing - 7 mm ID, 17 mm OD
- FAG 61905-2Z-HLC 1 Row Ball Bearing - 25 mm ID, 42 mm OD
- FAG 61806-2Z-HLC 1 Row Ball Bearing - 30 mm ID, 42 mm OD
- FAG 61807-2Z-HLC 1 Row Ball Bearing - 35 mm ID, 47 mm OD