Subtotal (1 unit)*
₩29,560.00
재고있음
- 33 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩29,560.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 209-1833
- 제조사 부품 번호:
- 16006
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 30mm | |
| Outside Diameter | 55mm | |
| Race Width | 9mm | |
| Cage Material | Sheet Metal | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 7.35kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 11.9kN | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Series | 0 Extra Light | |
| Limiting Speed | 17000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 30mm | ||
Outside Diameter 55mm | ||
Race Width 9mm | ||
Cage Material Sheet Metal | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 7.35kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 11.9kN | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Series 0 Extra Light | ||
Limiting Speed 17000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
SKF Ball Bearing, Deep-Groove Bearing Type, 30mm ID, 55mm OD - 16006
Get your loads off to a flying start with this single-row ball bearing from SKF. Designed with a deep groove, it's a smooth mover that keeps friction, vibration and noise to a minimum, boosting the comfort of your workplace. It handles radial and axial loads in both directions with a limiting speed of 17,000r/min and a dynamic load rating of 11.9kN, so you can be sure it can take the pressure of your high-performance applications. A cylindrical bore means it's a cinch to fit the unit onto a shaft, while the flat ends make it easier to stack ball bearings side-by-side when greater support is needed.
Features & Benefits
• Open-end design allows you to add your choice of lubrication after installation
• Compact outside diameter of 55mm and race width of 9mm to fit in tight spaces
Applications
• Robotics systems
• Pumps and fans
• Electric motors
• Lifts and conveyors
What's this ball bearing made from?
The ball bearing has a sheet metal cage and steel rings that not only ensure it's strong but also resistant to wear and corrosion. This helps you to keep machine maintenance to a minimum.
관련된 링크들
- SKF 16006/C3 1 Row Deep Groove Ball Bearing - 30 mm ID, 55 mm OD
- FAG 16006-A 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- FAG 16006-A-2Z 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- FAG 16006-A-C3 1 Row Deep Groove Ball Bearing - 30 mm ID, 55 mm OD
- RS PRO 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- SNR 16006 1 Row Ball Bearing - 90 mm ID, 140 mm OD
- SKF 6006 1 Row Ball Bearing - 30 mm ID, 55 mm OD
- SKF 81211 TN 55 mm ID Ball Bearing, 90 mm OD