SKF 1224 KM/C3 120 mm ID 2 Row Ball Bearing -, 215 mm OD
- RS 제품 번호:
- 209-1784
- 제조사 부품 번호:
- 1224 KM/C3
- 제조업체:
- SKF
Subtotal (1 unit)*
₩3,051,440.00
일시적 품절
- 2026년 12월 28일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩3,051,440.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 209-1784
- 제조사 부품 번호:
- 1224 KM/C3
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 120mm | |
| Outside Diameter | 215mm | |
| Race Width | 42mm | |
| Ball Material | Steel | |
| Cage Material | Machined Metal | |
| End Type | Open | |
| Number of Rows | 2 | |
| Static Load Rating | 53kN | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 119kN | |
| Standards/Approvals | No | |
| Series | Self-aligning ball bearings | |
| Bore Type | Tapered | |
| Limiting Speed | 4000rpm | |
| Bearing Type | Self-Aligning | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 120mm | ||
Outside Diameter 215mm | ||
Race Width 42mm | ||
Ball Material Steel | ||
Cage Material Machined Metal | ||
End Type Open | ||
Number of Rows 2 | ||
Static Load Rating 53kN | ||
Internal Clearance C3 | ||
Dynamic Load Rating 119kN | ||
Standards/Approvals No | ||
Series Self-aligning ball bearings | ||
Bore Type Tapered | ||
Limiting Speed 4000rpm | ||
Bearing Type Self-Aligning | ||
- COO (Country of Origin):
- MY
SKF Self Aligning Ball Bearing, 120 mm ID, 215 mm OD - 1224 KM/C3
Got a shaft that's difficult to align with its housing, or that's liable to bend during operation? This ball bearing from SKF is ideal to use in this situation, as it's not affected by the angular misalignment that can be caused by shaft deflection. Because it's self-aligning, it generates a minimal amount of friction during operation and remains cool even at high speeds. A bearing such as this one will give you a long service life in applications with a light axial load.
• Open end type allows for straightforward relubrication
• Tapered bore type enables the transfer of a load evenly while rolling
• Inside diameter of 120 mm and outside diameter of 215 mm, which are displaced relative to each other to accommodate combined loads
Application information
• Rotating machinery, such as stirrers and blenders
• Fans and blowers
• Intermediate shafts in vehicles
How do I mount a self-aligning bearing with a tapered bore?
Screw up the lock nut to the end of the indicated range. Remove the lock nut, then place the washer by securing the nut back on the sleeve. Bend one of the lock washer tabs into a matching slot on the nut.
관련된 링크들
- SKF 1224 KM 120 mm ID 2 Row Ball Bearing -, 215 mm OD
- SKF 1224 M 120 mm ID 2 Row Ball Bearing -, 215 mm OD
- SKF 2320 KM/C3 100 mm ID 2 Row Ball Bearing -, 215 mm OD
- SKF 6224 1 Row Ball Bearing - 120 mm ID, 215 mm OD
- SKF 6224/C4 1 Row Ball Bearing - 120 mm ID, 215 mm OD
- SKF 6224/C3 1 Row Ball Bearing - 120 mm ID, 215 mm OD
- SKF 6224/C3VL0241 1 Row Ball Bearing - 120 mm ID, 215 mm OD
- SKF 7224 BCBM 1 Row Ball Bearing - 120 mm ID, 215 mm OD 40 mm Race Width