SKF 1215 K 75 mm ID 2 Row Ball Bearing -, 130 mm OD

This ball bearing is a self-aligning, double-row component designed for rotating shafts requiring accommodation of misalignment and radial loads. It operates at moderate to high rotational speeds and is built for installations that need an open-ended bearing with a tapered bore and metal-retained elements. The design suits industrial assemblies where compensated shaft alignment and continuous rotation are required.

• Self-aligning design accommodates shaft misalignment during operation
• Double-row configuration increases radial load capacity for heavy use
• Steel balls provide Durable rolling elements for repetitive motion
• Sheet metal cage ensures stable ball spacing at elevated speeds
• CN internal clearance supports controlled axial and radial play
• 6700 r/min limiting speed enables higher-speed applications

• Suitable for agricultural shaft and rotary equipment bearings
• Ideal for conveyor systems requiring alignment tolerance
• Used with industrial gearboxes operating under radial load
• Can be used for large electric motor bearing support
• Suitable for pump shafts with tapered mounting requirements

The tapered bore requires a matching tapered adaptor or sleeve to achieve axial positioning and correct interference fit.

The two-row arrangement provides enhanced radial load support while permitting limited angular misalignment.

The dynamic capacity is 39 kN and the static capacity is 15.6 kN, indicating its suitability for intermittent and sustained radial loads.

The open end allows Visual inspection of rolling elements and facilitates re-lubrication without dismantling sealed components.