SKF 6205-2RSH/C4 1 Row Deep Groove Ball Bearing - 25 mm ID, 52 mm OD
- RS 제품 번호:
- 207-6484
- 제조사 부품 번호:
- 6205-2RSH/C4
- 제조업체:
- SKF
Subtotal (1 unit)*
₩27,200.00
재고있음
- 추가로 2026년 8월 24일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩27,200.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 207-6484
- 제조사 부품 번호:
- 6205-2RSH/C4
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 25mm | |
| Product Type | Deep Groove Ball Bearing | |
| Outside Diameter | 52mm | |
| Race Width | 15mm | |
| Ball Material | Steel | |
| Cage Material | Sheet Metal | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Internal Clearance | C4 | |
| Static Load Rating | 7.8kN | |
| Dynamic Load Rating | 14.8kN | |
| Bore Type | Cylindrical | |
| Standards/Approvals | No | |
| Series | 6205 | |
| Limiting Speed | 8500rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 25mm | ||
Product Type Deep Groove Ball Bearing | ||
Outside Diameter 52mm | ||
Race Width 15mm | ||
Ball Material Steel | ||
Cage Material Sheet Metal | ||
End Type Sealed | ||
Number of Rows 1 | ||
Internal Clearance C4 | ||
Static Load Rating 7.8kN | ||
Dynamic Load Rating 14.8kN | ||
Bore Type Cylindrical | ||
Standards/Approvals No | ||
Series 6205 | ||
Limiting Speed 8500rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
- COO (Country of Origin):
- BG
SKF 6205 Series Deep Groove Ball Bearing, 25mm Inside Diameter, 52mm Outside Diameter - 6205-2RSH/C4
This deep-groove ball bearing is a sealed, single-row rolling element designed to support radial and limited axial loads in rotating machinery. It is suitable for applications where consistent clearance and controlled internal play are required, and where protection against contamination is necessary for continuous operation.
Features and Benefits:
• Sealed construction reduces contamination ingress and maintenance needs
• C4 internal clearance allows thermal expansion compensation
• Sheet-metal cage ensures stable ball guidance at speed
• Steel balls provide consistent rolling contact and wear resistance
• Dynamic load capacity 14.8 kN supports moderate duty cycles
• Limiting speed 8,500 r/min enables high-speed rotation performance
• C4 internal clearance allows thermal expansion compensation
• Sheet-metal cage ensures stable ball guidance at speed
• Steel balls provide consistent rolling contact and wear resistance
• Dynamic load capacity 14.8 kN supports moderate duty cycles
• Limiting speed 8,500 r/min enables high-speed rotation performance
Applications
• Suitable for electric motors in automation equipment
• Ideal for precision fans and cooling assemblies in electronics
• Used with gearboxes in light mechanical drives
• Can be used for spindles in electrical actuator systems
• Suitable for conveyor rollers in assembly lines
• Ideal for precision fans and cooling assemblies in electronics
• Used with gearboxes in light mechanical drives
• Can be used for spindles in electrical actuator systems
• Suitable for conveyor rollers in assembly lines
What bore Interface does it provide for shafts?
It uses a cylindrical bore to accommodate standard press-fit or slip-fit shaft arrangements depending on mounting requirements.
How does the bearing handle side loads in Compact assemblies?
Its single-row deep-groove design permits radial load support with limited axial load capacity in both directions.
What material choices affect compatibility with lubricants and environments?
The races and rolling elements are steel, which is compatible with standard bearing greases
the sealed end prevents ingress that could contaminate the lubricant.
How does cage construction influence operational behaviour at high speed?
The sheet-metal cage offers low centrifugal distortion and good ball spacing, aiding performance near the specified maximum rotational speed.
What static support can it provide when equipment is stationary?
The static load capability is 7.8 kN, allowing it to withstand substantial static forces during stops or parked conditions.
관련된 링크들
- SKF 6205-2RSH/C3GJN 1 Row Deep Groove Ball Bearing - 25 mm ID, 52 mm OD
- SKF 6304-2RSH 1 Row Deep Groove Ball Bearing - 20 mm ID, 52 mm OD
- SKF 6205-2RSHK 1 Row Deep Groove Ball Bearing - 25 mm ID, 52 mm OD
- SKF 6205-2RSHNR 1 Row Deep Groove Ball Bearing - 25 mm ID, 52 mm OD
- SKF 6205-2RSL 1 Row Deep Groove Ball Bearing - 25 mm ID, 52 mm OD
- SKF 6205-RSH 1 Row Ball Bearing - 25 mm ID, 52 mm OD
- SKF 6205-2RSH 1 Row Ball Bearing - 25 mm ID, 52 mm OD
- SKF 6205-2Z/VA208 1 Row Deep Groove Ball Bearing - 25 mm ID, 52 mm OD