SKF 7012 CDGA/P4A 1 Row Angular Contact Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width
- RS 제품 번호:
- 207-5428
- 제조사 부품 번호:
- 7012 CDGA/P4A
- 제조업체:
- SKF
Subtotal (1 unit)*
₩805,320.00
재고있음
- 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩805,320.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 207-5428
- 제조사 부품 번호:
- 7012 CDGA/P4A
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 60mm | |
| Product Type | Angular Contact Ball Bearing | |
| Outside Diameter | 95mm | |
| Race Width | 18mm | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Contact Angle | 15° | |
| Static Load Rating | 34.5kN | |
| Dynamic Load Rating | 40.3kN | |
| Series | 7012 | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Limiting Speed | 22000rpm | |
| Bearing Type | Single Row Angular Contact Ball | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 60mm | ||
Product Type Angular Contact Ball Bearing | ||
Outside Diameter 95mm | ||
Race Width 18mm | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Contact Angle 15° | ||
Static Load Rating 34.5kN | ||
Dynamic Load Rating 40.3kN | ||
Series 7012 | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Limiting Speed 22000rpm | ||
Bearing Type Single Row Angular Contact Ball | ||
- COO (Country of Origin):
- IT
SKF 7012 Series Angular Contact Ball Bearing, 60mm Bore Diameter, 95mm Outside Diameter - 7012 CDGA/P4A
This angular contact ball bearing provides axial and radial load handling for precision rotating assemblies in automation and electromechanical systems. Designed as a single-row unit with an open-end configuration, it suits applications requiring accurate rotational alignment and consistent contact geometry at moderate contact angles. The product is intended for use where compact, high-speed performance and defined internal clearance are required.
Features and Benefits:
• 15° contact angle for combined axial and radial load support
• Steel balls for Durable rolling contact and wear resistance
• Limiting speed 22,000 r/min for high-speed operational demands
• Internal clearance CN to maintain predictable preload and stiffness
• Dynamic load capacity 40.3 kN for sustained operational loads
• Static load capacity 34.5 kN to withstand stationary loads
• Steel balls for Durable rolling contact and wear resistance
• Limiting speed 22,000 r/min for high-speed operational demands
• Internal clearance CN to maintain predictable preload and stiffness
• Dynamic load capacity 40.3 kN for sustained operational loads
• Static load capacity 34.5 kN to withstand stationary loads
Applications
• Suitable for high-speed spindle systems in automation equipment
• Ideal for precision motor shafts in electrical drives
• Used with servo gearboxes requiring axial load accommodation
• Can be used for rotary encoders and indexing mechanisms
• Used for Compact gearboxes in robotics and motion control
• Ideal for precision motor shafts in electrical drives
• Used with servo gearboxes requiring axial load accommodation
• Can be used for rotary encoders and indexing mechanisms
• Used for Compact gearboxes in robotics and motion control
What shaft Interface does it require for installation?
The bore is manufactured with a parallel internal profile for slip-fit mounting onto cylindrical shafts.
How does the open-end design affect maintenance?
With exposed rings and rolling elements, Visual inspection and lubrication access are simplified compared with sealed variants.
What element material is used for rolling contact?
The bearing utilises steel balls to provide consistent contact behaviour and long service under dynamic cycling.
How many rows of rolling elements are provided?
The bearing is configured as a single row to allow axial load transmission in one direction while retaining compactness.
관련된 링크들
- NSK 7012CTRV1VSULP3 1 Row Angular Contact Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width
- SKF 7206 CDGA/P4A 1 Row Angular Contact Ball Bearing - 30 mm ID, 62 mm OD 16 mm Race Width
- SKF 7012 CDGB/P4A 1 Row Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width
- SKF 7012 CD/P4A 1 Row Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width
- SKF 7012 CD/P4ADBA 2 Row Ball Bearing - 60 mm ID, 95 mm OD 36 mm Race Width
- SKF 7012 ACDGA/P4A 1 Row Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width
- SKF 7012 ACD/P4A 1 Row Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width
- NTN 7012UADG/GNP42 Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width