SKF 3205 A-2RS1 2 Row Ball Bearing - 25 mm ID, 52 mm OD 20.6 mm Race Width
- RS 제품 번호:
- 195-9592
- 제조사 부품 번호:
- 3205 A-2RS1
- 제조업체:
- SKF
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩111,320.00
재고있음
- 21 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩111,320.00 |
| 13 - 24 | ₩106,880.00 |
| 25 + | ₩104,640.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 195-9592
- 제조사 부품 번호:
- 3205 A-2RS1
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 25mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 52mm | |
| Race Width | 20.6mm | |
| Cage Material | Sheet Metal | |
| Ball Material | Steel | |
| End Type | Sealed | |
| Number of Rows | 2 | |
| Contact Angle | 30° | |
| Internal Clearance | CN | |
| Static Load Rating | 15.3kN | |
| Dynamic Load Rating | 22kN | |
| Series | 2 Light | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Limiting Speed | 8500rpm | |
| Bearing Type | Double Row Angular Contact Ball | |
| Race Type | Plain | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 25mm | ||
Product Type Ball Bearing | ||
Outside Diameter 52mm | ||
Race Width 20.6mm | ||
Cage Material Sheet Metal | ||
Ball Material Steel | ||
End Type Sealed | ||
Number of Rows 2 | ||
Contact Angle 30° | ||
Internal Clearance CN | ||
Static Load Rating 15.3kN | ||
Dynamic Load Rating 22kN | ||
Series 2 Light | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Limiting Speed 8500rpm | ||
Bearing Type Double Row Angular Contact Ball | ||
Race Type Plain | ||
제외
- COO (Country of Origin):
- AT
SKF Double-Row Angular-Contact Ball Bearing, 25mm ID, 52mm OD - 3205 A-2RS1
Save space on your axial shaft with this double-row angular contact bearing from SKF. It accommodates both radial and axial loads in either direction and you can use it in place of two back-to-back single-row bearings with angular contacts. The unit is manufactured from ultra-clean steel, which gives it a higher rotational speed and greater load-carrying capacity. Its seals reduce the need for maintenance and re-lubrication, so you benefit from longer machine uptime and enhanced productivity.
• No need to dispose of used grease for a lighter carbon footprint
• Reduced noise and vibration levels for smoother machine performance and quieter operation
• Low-friction seals keep the bearing cool for improved performance
• Crown cage design that provides better ball guidance and lubrication for a higher speed rating
Applications
• Transmission systems
• Material handling
• Fans and blowers
• Gear systems
Can I use this bearing in a screw compressor?
Yes, you can use this bearing in a screw compressor. It's well-suited to applications where there are frequent rapid starts and stops, together with contaminated or inadequate lubrication conditions. Its combination of robust material and design offers up to 300% improvement in service life.
관련된 링크들
- SKF 3205 A 2 Row Ball Bearing - 25 mm ID, 52 mm OD 20.6 mm Race Width
- SKF 3205 ATN9 2 Row Ball Bearing - 25 mm ID, 52 mm OD 20.6 mm Race Width
- SKF 3205 ATN9/C2 2 Row Ball Bearing - 25 mm ID, 52 mm OD 20.6 mm Race Width
- SKF 3205 ATN9/C3 2 Row Ball Bearing - 25 mm ID, 52 mm OD 20.6 mm Race Width
- SKF 3205 A-2Z/MT33 2 Row Ball Bearing - 25 mm ID, 52 mm OD 20.6 mm Race Width
- SKF 3205 A-2Z 1 Row Angular Contact Ball Bearing - 25 mm ID, 52 mm OD 20.6 mm Race Width
- SKF 3205 A/C3 1 Row Angular Contact Ball Bearing - 25 mm ID, 52 mm OD 20.6 mm Race Width
- SKF 3205 A-2RS1/C3 2 Row Ball Bearing - 25 mm ID, 52 mm OD 20.6 mm Race Width