FAG 16005-A 1 Row Ball Bearing - 25 mm ID, 47 mm OD
- RS 제품 번호:
- 190-8328
- 제조사 부품 번호:
- 16005-A
- 제조업체:
- FAG
Subtotal (1 unit)*
₩20,416.80
재고있음
- 9 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩20,416.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 190-8328
- 제조사 부품 번호:
- 16005-A
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 25 mm | |
| Outside Diameter | 47 mm | |
| Race Width | 8mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 4.65kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 7.7kN | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Limiting Speed | 22200rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 25 mm | ||
Outside Diameter 47 mm | ||
Race Width 8mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 4.65kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 7.7kN | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Limiting Speed 22200rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
High and very high speeds are required
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
관련된 링크들
- FAG 16005-A-2Z 1 Row Ball Bearing - 25 mm ID, 47 mm OD
- FAG 16005-A-C3 1 Row Deep Groove Ball Bearing - 25 mm ID, 47 mm OD
- SKF 16005 1 Row Ball Bearing - 25 mm ID, 47 mm OD
- SKF 16005/C3 1 Row Deep Groove Ball Bearing - 25 mm ID, 47 mm OD
- FAG 51205 1 Row Ball Bearing - 25 mm ID, 47 mm OD
- FAG 51106 1 Row Ball Bearing - 30 mm ID, 47 mm OD
- FAG 11204-TVH 20 mm ID 2 Row Ball Bearing -, 47 mm OD
- FAG 6005-C 1 Row Ball Bearing - 25 mm ID, 47 mm OD