FAG 16003-A 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- RS 제품 번호:
- 190-8324
- 제조사 부품 번호:
- 16003-A
- 제조업체:
- FAG
Subtotal (1 unit)*
₩19,300.00
재고있음
- 추가로 2026년 10월 12일 부터 22 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩19,300.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 190-8324
- 제조사 부품 번호:
- 16003-A
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Inside Diameter | 17mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 35mm | |
| Race Width | 8mm | |
| Cage Material | Steel | |
| Race Material | Bearing Steel | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 3.25kN | |
| Dynamic Load Rating | 6.4kN | |
| Standards/Approvals | No | |
| Series | 16003-A | |
| Bore Type | Cylindrical | |
| Limiting Speed | 3100rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Flange Outside Diameter | 35mm | |
| Race Type | Deep Groove | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Inside Diameter 17mm | ||
Product Type Ball Bearing | ||
Outside Diameter 35mm | ||
Race Width 8mm | ||
Cage Material Steel | ||
Race Material Bearing Steel | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 3.25kN | ||
Dynamic Load Rating 6.4kN | ||
Standards/Approvals No | ||
Series 16003-A | ||
Bore Type Cylindrical | ||
Limiting Speed 3100rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Flange Outside Diameter 35mm | ||
Race Type Deep Groove | ||
Schaeffler 16003-A Series Ball Bearing, 35mm Outside Diameter, 17mm Inside Diameter - 16003-A
This ball bearing is a single-row deep-groove component designed to facilitate smooth rotational motion in mechanical assemblies. It features steel rolling elements and races configured for open-end access with a cylindrical bore, suitable for installations where minimal sealing is required and accessible lubrication is preferred.
Features and Benefits:
• 6.4 kN dynamic load rating for sustained operational loads
• 3.25 kN static load capacity for stationary load support
• 3100 r/min limiting speed enabling moderate-speed applications
• CN internal clearance for controlled radial play and thermal growth
• Steel cage and races for Durable contact and load distribution
• Deep-groove race form for consistent radial and axial load handling
• 3.25 kN static load capacity for stationary load support
• 3100 r/min limiting speed enabling moderate-speed applications
• CN internal clearance for controlled radial play and thermal growth
• Steel cage and races for Durable contact and load distribution
• Deep-groove race form for consistent radial and axial load handling
Applications
• Suitable for electric motor shafts with moderate speed demands
• Ideal for gearbox intermediate shafts under continuous load
• Used with pulley assemblies requiring radial and axial support
• Can be used for light industrial conveyor roller bearings
• Suitable for pump and fan spindles operating at steady speeds
• Ideal for gearbox intermediate shafts under continuous load
• Used with pulley assemblies requiring radial and axial support
• Can be used for light industrial conveyor roller bearings
• Suitable for pump and fan spindles operating at steady speeds
What bore configuration does this bearing use?
It has a cylindrical bore that permits direct shaft mounting without taper fittings.
How is the bearing retained axially when installed?
The flange outside diameter offers a seating Interface for axial location in housings.
Which components are MADE of bearing steel?
The races and rolling elements are manufactured from bearing steel for wear resistance.
What type of end access does the bearing provide for maintenance?
The open-end design allows inspection and replenishment of lubricant without disassembly.
How many rows of rolling elements are present?
There is a single row of balls to support combined radial and axial loads.
관련된 링크들
- FAG 16003-A-2Z 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- FAG 16003-A-C3 1 Row Deep Groove Ball Bearing - 17 mm ID, 35 mm OD
- FAG 16003-A-2RSR 1 Row Deep Groove Ball Bearing - 17 mm ID, 35 mm OD
- NTN 16003C3 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- SKF 16003 1 Row Deep Groove Ball Bearing - 17 mm ID, 35 mm OD
- SKF 16003-2Z 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- FAG 6003 1 Row Ball Bearing - 17 mm ID, 35 mm OD
- FAG 6003-Z 1 Row Ball Bearing - 17 mm ID, 35 mm OD