INA KH20-PP 1 Row Ball Bearing - 20 mm ID, 28 mm OD 30 mm Race Width

This ball bearing is designed as a linear bearing suitable for various applications in automation and mechanical industries. With an inside diameter of 20mm and an outside diameter of 28mm, it offers exceptional performance while providing seals on both sides for enhanced durability. Constructed from steel and featuring a polyamide cage, this bearing ensures reliable operation under high loads.

• Offers a static load rating of 1.01 kN for durability

• Suitable for use in automation systems for precise motion control

This bearing can manage a static load of 1.01 kN and a dynamic load of 1.17 kN, making it well-suited for high-load applications.

The sealing arrangement on both sides prevents dirt and moisture ingress, prolonging the lifespan and maintaining optimal performance of the bearing.

It is primarily made of steel, which provides strength, and features a polyamide cage designed to enhance efficiency by reducing friction during operation.

INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.;The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.;The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.

• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise

Due to the closed design, these linear bearings are suitable for use on shafts.

PP - Lip seals on both sides