SKF 6306/C4 1 Row Deep Groove Ball Bearing - 30 mm ID, 72 mm OD
- RS 제품 번호:
- 126-2557
- 제조사 부품 번호:
- 6306/C4
- 제조업체:
- SKF
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩34,500.00
재고있음
- 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩34,500.00 |
| 13 - 24 | ₩33,120.00 |
| 25 + | ₩32,440.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 126-2557
- 제조사 부품 번호:
- 6306/C4
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 30mm | |
| Product Type | Deep Groove Ball Bearing | |
| Outside Diameter | 72mm | |
| Race Width | 19mm | |
| Ball Material | Steel | |
| Race Material | Steel | |
| Cage Material | Sheet Metal | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 16kN | |
| Internal Clearance | C4 | |
| Dynamic Load Rating | 29.6kN | |
| Standards/Approvals | No | |
| Series | 6306 | |
| Bore Type | Cylindrical | |
| Limiting Speed | 13000rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 30mm | ||
Product Type Deep Groove Ball Bearing | ||
Outside Diameter 72mm | ||
Race Width 19mm | ||
Ball Material Steel | ||
Race Material Steel | ||
Cage Material Sheet Metal | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 16kN | ||
Internal Clearance C4 | ||
Dynamic Load Rating 29.6kN | ||
Standards/Approvals No | ||
Series 6306 | ||
Bore Type Cylindrical | ||
Limiting Speed 13000rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
SKF 6306 Series Deep Groove Ball Bearing, 30mm Inside Diameter, 72mm Outside Diameter - 6306/C4
This deep groove ball bearing is designed to support radial loads and moderate axial forces in rotating equipment. It is intended for applications where unobstructed access to rolling elements is acceptable, and where a cylindrical bore and open ends aid installation and lubrication. The component is built for high-speed operation and continuous duty in electrical and mechanical systems.
Features and Benefits:
• Dynamic capacity 29.6 kN provides higher operational load handling
• Static capacity 16 kN limits permanent deformation under Peak loads
• Internal clearance C4 reduces thermal preload during high-temperature use
• Limiting speed 13 000 r/min enables high-speed shaft rotation
• Sheet metal cage offers secure ball retention with low mass
• Plain steel races ensure consistent contact geometry and wear resistance
• Static capacity 16 kN limits permanent deformation under Peak loads
• Internal clearance C4 reduces thermal preload during high-temperature use
• Limiting speed 13 000 r/min enables high-speed shaft rotation
• Sheet metal cage offers secure ball retention with low mass
• Plain steel races ensure consistent contact geometry and wear resistance
Applications
• Suitable for electric motor spindle support in industrial drives
• Ideal for precision gearbox radial support in automation systems
• Used with rotary encoders in electronics for dependable rotation tracking
• Can be used for rotor shafts in small fans and blowers
• Used for pump shafts requiring open-end lubrication access
• Ideal for precision gearbox radial support in automation systems
• Used with rotary encoders in electronics for dependable rotation tracking
• Can be used for rotor shafts in small fans and blowers
• Used for pump shafts requiring open-end lubrication access
What bore type should my housing adaptor match?
The bearing has a cylindrical bore, so housings or adaptors must provide an interference or locating fit suitable for a plain bore installation.
How does the open end design affect lubrication?
Open ends permit direct application of lubricants and easier re-lubrication intervals but require external sealing if contamination control is needed.
What material considerations affect longevity in corrosive environments?
Races and balls are steel
therefore corrosion resistance depends on lubricant selection or additional protective measures because the Basic material is not stainless.
관련된 링크들
- SKF 6306-Z 1 Row Deep Groove Ball Bearing - 30 mm ID, 72 mm OD
- SKF 6306-2ZNR 1 Row Deep Groove Ball Bearing - 30 mm ID, 72 mm OD
- Beco 6306BHTS-330 Deep Groove Ball Bearing - 30 mm ID, 72 mm OD
- Beco 6306-ZZBHTS280 Deep Groove Ball Bearing - 30 mm ID, 72 mm OD
- SKF E2.6306-2Z/C3 1 Row Deep Groove Ball Bearing - 30 mm ID, 72 mm OD
- FAG 6306-Z 1 Row Deep Groove Ball Bearing - 30 mm ID, 72 mm OD
- FAG 6306-N 1 Row Deep Groove Ball Bearing - 30 mm ID, 72 mm OD
- NTN 6306NR 1 Row Deep Groove Ball Bearing - 30 mm ID, 72 mm OD