Subtotal (1 pack of 10 units)*
₩3,851,940.00
일시적 품절
- 2026년 12월 09일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
팩 | 한팩당 | 한팩당* |
|---|---|---|
| 1 + | ₩3,851,940.00 | ₩385,194.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 587-854
- 제조사 부품 번호:
- 2310
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 50mm | |
| Outside Diameter | 110mm | |
| Race Width | 40mm | |
| Ball Material | Steel | |
| Cage Material | Sheet Metal | |
| Number of Rows | 2 | |
| Internal Clearance | CN | |
| Static Load Rating | 20kN | |
| Dynamic Load Rating | 63.7kN | |
| Standards/Approvals | RoHS | |
| Series | 2310 | |
| Bore Type | Cylindrical | |
| Limiting Speed | 8500rpm | |
| Bearing Type | Self-Aligning | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 50mm | ||
Outside Diameter 110mm | ||
Race Width 40mm | ||
Ball Material Steel | ||
Cage Material Sheet Metal | ||
Number of Rows 2 | ||
Internal Clearance CN | ||
Static Load Rating 20kN | ||
Dynamic Load Rating 63.7kN | ||
Standards/Approvals RoHS | ||
Series 2310 | ||
Bore Type Cylindrical | ||
Limiting Speed 8500rpm | ||
Bearing Type Self-Aligning | ||
SKF 2310 Series Ball Bearing, 50mm Inside Diameter, 110mm Outside Diameter - 2310
This ball bearing is a two-row self-aligning component designed to support rotating shafts where minor misalignment occurs. It uses steel balls and a cylindrical bore to enable smooth operation in rotary equipment, with a sheet-metal cage maintaining ball spacing. The unit meets environmental restrictions indicated by RoHS and is suited to industrial mechanical and electromechanical assemblies.
Features and Benefits:
• Dynamic load capacity 63.7 kN for sustained radial loads
• Static load capacity 20 kN to resist heavy static forces
• Limiting speed 8,500 r/min for high-speed applications
• Internal clearance CN to accommodate thermal and assembly variations
• Sheet-metal cage reduces friction and maintains ball separation
• Two-row self-aligning design compensates for shaft misalignment
• Static load capacity 20 kN to resist heavy static forces
• Limiting speed 8,500 r/min for high-speed applications
• Internal clearance CN to accommodate thermal and assembly variations
• Sheet-metal cage reduces friction and maintains ball separation
• Two-row self-aligning design compensates for shaft misalignment
Applications
• Suitable for gearbox input shafts in automation systems
• Ideal for motorised spindles in electrical drive assemblies
• Used with conveyor rollers subject to radial loading
• Can be used for actuator pivots in robotics equipment
• Suitable for bearing housings in control-panel mechanisms
• Ideal for motorised spindles in electrical drive assemblies
• Used with conveyor rollers subject to radial loading
• Can be used for actuator pivots in robotics equipment
• Suitable for bearing housings in control-panel mechanisms
What bore configuration does it require for installation?
It fits cylindrical bores and is intended for straight-shaft seating without an interference fit.
How does the bearing cope with misalignment during operation?
The dual-row self-aligning geometry allows the inner ring to tilt relative to the outer ring, maintaining load distribution when shaft and housing axes are not perfectly aligned.
What materials are the contact surfaces MADE from?
The rolling elements are steel and the separator is formed from sheet metal to balance durability with low running friction.
How should it be selected for high-speed applications?
Choose it when rotational speeds approach 8,500 r/min and ensure lubrication and housing design support that limiting speed for continuous operation.
관련된 링크들
- SKF 2310 K 50 mm ID 2 Row Ball Bearing -, 110 mm OD
- SKF 2310/C3 50 mm ID 2 Row Ball Bearing -, 110 mm OD
- SKF 2310 M/C3 50 mm ID 2 Row Ball Bearing -, 110 mm OD
- SKF 2310 K/C3 50 mm ID 2 Row Ball Bearing -, 110 mm OD
- SKF 2310 E-2RS1TN9 50 mm ID 2 Row Ball Bearing -, 110 mm OD
- SKF NU 2310 ECP 50 mm ID Roller Bearing, 110 mm OD
- NTN 2310S 50 mm ID 2 Row Ball Bearing -, 110 mm OD
- NTN 2310SK 50 mm ID 2 Row Ball Bearing -, 110 mm OD
