SKF W 637/3-2Z 1 Row Deep Groove Ball Bearing - 3 mm ID, 6 mm OD
- RS 제품 번호:
- 587-798
- 제조사 부품 번호:
- W 637/3-2Z
- 제조업체:
- SKF
Subtotal (1 pack of 5 units)*
₩240,060.00
재고있음
- 3 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
팩 | 한팩당 | 한팩당* |
|---|---|---|
| 1 + | ₩240,060.00 | ₩48,012.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 587-798
- 제조사 부품 번호:
- W 637/3-2Z
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 3mm | |
| Product Type | Deep Groove Ball Bearing | |
| Outside Diameter | 6mm | |
| Race Width | 3mm | |
| Cage Material | Stainless Steel | |
| Race Material | Stainless Steel | |
| Ball Material | Stainless Steel | |
| End Type | Shielded | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 0.04kN | |
| Dynamic Load Rating | 0.117kN | |
| Standards/Approvals | ISO P0 / ABEC 1 | |
| Series | 637 | |
| Bore Type | Deep Groove | |
| Limiting Speed | 85000rpm | |
| Bearing Type | Deep Groove Ball | |
| Race Type | Deep Grooved | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 3mm | ||
Product Type Deep Groove Ball Bearing | ||
Outside Diameter 6mm | ||
Race Width 3mm | ||
Cage Material Stainless Steel | ||
Race Material Stainless Steel | ||
Ball Material Stainless Steel | ||
End Type Shielded | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 0.04kN | ||
Dynamic Load Rating 0.117kN | ||
Standards/Approvals ISO P0 / ABEC 1 | ||
Series 637 | ||
Bore Type Deep Groove | ||
Limiting Speed 85000rpm | ||
Bearing Type Deep Groove Ball | ||
Race Type Deep Grooved | ||
- COO (Country of Origin):
- JP
SKF 637 Series Deep Groove Ball Bearing, 3mm Inside Diameter, 6mm Outside Diameter - W 637/3-2Z
This deep-groove ball bearing is a Compact, shielded solution engineered for precision rotational support in small-scale equipment. It is intended for applications where low friction and consistent running at very high speeds are required, offering corrosion-resistant contact surfaces and a sealed configuration to limit contamination in Compact assemblies.
Features and Benefits:
• Shields on both sides reduce ingress and simplify maintenance
• Stainless-steel rolling elements resist corrosion during operation
• Stainless-steel rings provide Durable wear resistance under load
• Rated for up to 85,000 r/min to support high-speed motors
• Dynamic capacity 0.117 kN and static capacity 0.036 kN for load handling
• Stainless-steel rolling elements resist corrosion during operation
• Stainless-steel rings provide Durable wear resistance under load
• Rated for up to 85,000 r/min to support high-speed motors
• Dynamic capacity 0.117 kN and static capacity 0.036 kN for load handling
Applications
• Suitable for precision fans and micro blowers in electronics cooling
• Ideal for spindle support in miniature rotary actuators
• Used with small high-speed motors in robotics and automation
• Can be used for rotary encoders and sensor shafts in control systems
• Ideal for spindle support in miniature rotary actuators
• Used with small high-speed motors in robotics and automation
• Can be used for rotary encoders and sensor shafts in control systems
How does the sealing affect lubrication needs?
The double shields limit contamination but do not retain grease indefinitely, so periodic relubrication is advisable based on operating hours and environment.
What does bearing internal clearance mean for installation?
The CN rating denotes normal clearance at ambient temperature, allowing slight axial and radial movement to accommodate thermal expansion and shaft tolerances.
How do load ratings translate to application selection?
Use the dynamic load Value for assessing fatigue life under continuous rotation and the static load Value when sizing for infrequent or stationary Peak loads.
Are there considerations for mounting on small-diameter shafts?
Precision in shaft concentricity and appropriate interference or transition fits are important to prevent distortion of the ring and maintain rotational accuracy.
관련된 링크들
- SKF W 637/8-2Z 1 Row Deep Groove Ball Bearing - 8 mm ID, 12 mm OD
- SKF 639/3-2Z 1 Row Deep Groove Ball Bearing - 3 mm ID, 8 mm OD
- SKF 623-2Z/C3 1 Row Deep Groove Ball Bearing - 3 mm ID, 10 mm OD
- SKF W 619/3-2Z 1 Row Deep Groove Ball Bearing - 3 mm ID, 8 mm OD
- SKF W 638/3-2Z 1 Row Deep Groove Ball Bearing - 3 mm ID, 7 mm OD
- SKF 6206-Z/C3 1 Row Deep Groove Ball Bearing - 30 mm ID, 62 mm OD
- SKF 6202-Z/C3 1 Row Deep Groove Ball Bearing - 15 mm ID, 35 mm OD
- SKF 6203-Z/C3 1 Row Deep Groove Ball Bearing - 17 mm ID, 40 mm OD