Subtotal (1 pack of 10 units)*
₩1,103,240.00
일시적 품절
- 2026년 10월 15일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
팩 | 한팩당 | 한팩당* |
|---|---|---|
| 1 + | ₩1,103,240.00 | ₩110,324.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 587-519
- 제조사 부품 번호:
- 51307
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Thrust Ball Bearing | |
| Inside Diameter | 35mm | |
| Outside Diameter | 68mm | |
| Race Width | 24mm | |
| Cage Material | Sheet Metal | |
| Number of Rows | 1 | |
| Static Load Rating | 96.5kN | |
| Dynamic Load Rating | 49.4kN | |
| Series | 51307 | |
| Standards/Approvals | No | |
| Bore Type | Ground | |
| Limiting Speed | 4800rpm | |
| Bearing Type | Thrust Ball | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Thrust Ball Bearing | ||
Inside Diameter 35mm | ||
Outside Diameter 68mm | ||
Race Width 24mm | ||
Cage Material Sheet Metal | ||
Number of Rows 1 | ||
Static Load Rating 96.5kN | ||
Dynamic Load Rating 49.4kN | ||
Series 51307 | ||
Standards/Approvals No | ||
Bore Type Ground | ||
Limiting Speed 4800rpm | ||
Bearing Type Thrust Ball | ||
SKF 51307 Series Thrust Ball Bearing, 35mm Inside Diameter, 68mm Outside Diameter - 51307
This thrust ball bearing provides axial load support for assemblies requiring reliable thrust contact in rotary systems. Designed for applications where a dedicated axial bearing is needed, it suits rotating shafts and housings in industrial equipment and machinery. The component is built to perform under sustained axial loads while maintaining operational continuity at moderate rotational speeds.
Features & Benefits
• Sheet metal cage reduces mass and aids lubricant circulation
• Ground bore ensures precise seating and accurate alignment
• Single-row configuration simplifies axial load handling
• Dynamic load capacity 49.4 kN for sustained operational loads
• Ground bore ensures precise seating and accurate alignment
• Single-row configuration simplifies axial load handling
• Dynamic load capacity 49.4 kN for sustained operational loads
**Applications**
• Suitable for axial support in automation actuators
• Ideal for preload elements in electrical drive assemblies
• Used with rotary contacts in electronic test rigs
• Can be used for thrust support in mechanical gear trains
• Used for vertical shaft axial restraint in motor units
• Ideal for preload elements in electrical drive assemblies
• Used with rotary contacts in electronic test rigs
• Can be used for thrust support in mechanical gear trains
• Used for vertical shaft axial restraint in motor units
How does the bore finish influence installation accuracy?
The bore is ground to provide a tight, true internal surface that aids precise interference or transition fits and minimises runout during assembly.
What operational limits should be observed for rotational speed?
The bearing’s maximum permissible rotational rate is 4800 r/min, operating near this speed requires careful temperature monitoring and appropriate lubrication.
How does the bearing behave under static loading conditions?
With a static capacity of 96.5 kN, it can withstand significant non-rotating axial forces without permanent deformation when correctly mounted.
관련된 링크들
- NTN 51307 1 Row Thrust Ball Bearing - 35 mm ID, 68 mm OD
- SKF 53307 1 Row Thrust Ball Bearing - 35 mm ID, 68 mm OD
- SKF NKX 20 20 mm ID Combined Needle Roller & Thrust Ball Bearing Thrust Ball, Combined Needle Roller, 35 mm OD
- SKF 51407 1 Row Thrust Ball Bearing - 35 mm ID, 80 mm OD
- SKF NKX 35 Z 35 mm ID Needle Roller Bearing Thrust Ball, Needle Roller, 47 mm OD
- SKF BSD 3572 CGA 1 Row Thrust Ball Bearing - 35 mm ID, 72 mm OD 15 mm Race Width
- SKF BSD 3572 CGB 1 Row Thrust Ball Bearing - 35 mm ID, 72 mm OD 15 mm Race Width
- SKF NKX 15 Z 15 mm ID Combined Needle Roller & Thrust Ball Bearing Thrust Ball, Combined Needle Roller, 24 mm OD