SKF 61815 1 Row Deep Groove Ball Bearing - 75 mm ID, 95 mm OD

This deep groove ball bearing is a single-row rolling element designed to support radial loads in rotating assemblies within automation, electronics, electrical and mechanical systems. It features an open configuration and a cylindrical bore to accommodate shafts where unobstructed axial access is required. The bearing is constructed with hardened balls and races for continuous rotary motion at elevated speeds.

• Dynamic load capacity 12.5kN for sustained operational loads
• Static load rating 10.8kN for high-resistance standstill loads
• Limiting speed 8500r/min to suit high-speed usage
• Sheet metal cage reduces mass while guiding rolling elements
• CN internal clearance to accommodate thermal expansion and shaft misalignment
• Open end design for easy lubrication and inspection

• Suitable for high-speed motors in automation equipment
• Ideal for spindle assemblies in small machine tools
• Used with precision gearboxes requiring cylindrical bores
• Can be used for rotary encoders in electronics systems
• Suitable for electrical actuators needing simple lubrication access

The balls are manufactured from bearing-grade steel to provide hardness and wear resistance during continuous rotation.

The sheet metal cage minimises centrifugal distortion at speed and maintains separation between balls to reduce impact stresses under cyclic loading.

The open configuration allows easier lubrication but offers no particulate exclusion, so external sealing or contamination control is required for dusty conditions.