대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩196,521.00
재고있음
- 4 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 5 | ₩196,521.00 |
| 6 - 24 | ₩188,272.50 |
| 25 + | ₩182,578.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 506-006
- 제조사 부품 번호:
- 6313/C3
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 65mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 140mm | |
| Race Width | 33mm | |
| Cage Material | Sheet Metal | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 60kN | |
| Dynamic Load Rating | 97.5kN | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Series | 3 Medium | |
| Limiting Speed | 6700rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 65mm | ||
Product Type Ball Bearing | ||
Outside Diameter 140mm | ||
Race Width 33mm | ||
Cage Material Sheet Metal | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 60kN | ||
Dynamic Load Rating 97.5kN | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Series 3 Medium | ||
Limiting Speed 6700rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
제외
- COO (Country of Origin):
- FR
SKF Ball Bearing, Deep Groove, Open End, 65mm ID, 140mm OD - 6313/C3
This single-row, plain-race ball bearing from SKF can accommodate a limited axial load as well as a substantial radial load, acting in both directions. As a deep-groove unit, it's optimised for low noise and minimal friction, enabling higher rotational speeds and running at a lower temperature, which extends the life of the bearing. The open-end design makes relubricating it easy, and other than this it needs very little in the way of maintenance.
• Steel cage combines strength with corrosion resistance, so suited to damp industrial conditions
• Parallel bore to fit straight onto a shaft without the need for a bearing sleeve
• Dynamic load rating of 97.5 kN makes it suitable for rotating heavy loads
Applications
• Heavy-duty motors
• Pumps
• Automation controls
Where can I use an open-end ball bearing?
Open-end ball bearings are suitable for use in clean environments where you don't need to worry about dust and dirt contaminating the inside of the bearing. The open-end style allows the lubricant to travel freely. For dirty environments, a sealed or shielded ball bearing is a more suitable option.
관련된 링크들
- SKF 6313 1 Row Ball Bearing - 65 mm ID, 140 mm OD
- SKF 6313-2Z/C3 1 Row Ball Bearing - 65 mm ID, 140 mm OD
- SKF 6313 M/C3 1 Row Ball Bearing - 65 mm ID, 140 mm OD
- SKF 6313-2RS1 1 Row Ball Bearing - 65 mm ID, 140 mm OD
- NSK 6313C3 1 Row Ball Bearing - 65 mm ID, 140 mm OD
- SKF 6313-Z 1 Row Ball Bearing - 65 mm ID, 140 mm OD
- SKF 6313-2Z 1 Row Ball Bearing - 65 mm ID, 140 mm OD
- SKF 6313/C4 1 Row Ball Bearing - 65 mm ID, 140 mm OD