SKF 3200 A-2RS1TN9/MT33 2 Row Ball Bearing - 10 mm ID, 30 mm OD 14 mm Race Width
- RS 제품 번호:
- 505-596
- 제조사 부품 번호:
- 3200 A-2RS1TN9/MT33
- 제조업체:
- SKF
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩79,813.50
일시적 품절
- 2026년 7월 06일 부터 26 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 5 | ₩79,813.50 |
| 6 - 11 | ₩76,615.50 |
| 12 + | ₩73,437.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 505-596
- 제조사 부품 번호:
- 3200 A-2RS1TN9/MT33
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 10mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 30mm | |
| Race Width | 14mm | |
| Ball Material | Steel | |
| Cage Material | Non-Metallic | |
| End Type | Sealed | |
| Number of Rows | 2 | |
| Internal Clearance | CN | |
| Static Load Rating | 4.3kN | |
| Contact Angle | 30° | |
| Dynamic Load Rating | 7.61kN | |
| Standards/Approvals | No | |
| Series | 2 Light | |
| Bore Type | Parallel | |
| Limiting Speed | 17000rpm | |
| Bearing Type | Double Row Angular Contact Ball | |
| Race Type | Plain | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 10mm | ||
Product Type Ball Bearing | ||
Outside Diameter 30mm | ||
Race Width 14mm | ||
Ball Material Steel | ||
Cage Material Non-Metallic | ||
End Type Sealed | ||
Number of Rows 2 | ||
Internal Clearance CN | ||
Static Load Rating 4.3kN | ||
Contact Angle 30° | ||
Dynamic Load Rating 7.61kN | ||
Standards/Approvals No | ||
Series 2 Light | ||
Bore Type Parallel | ||
Limiting Speed 17000rpm | ||
Bearing Type Double Row Angular Contact Ball | ||
Race Type Plain | ||
제외
- COO (Country of Origin):
- BG
SKF Plain Angular Contact Ball Bearing, 10mm ID, 30mm OD - 3200A-2RS1TN9/MT33
Use this double-row angular contact ball bearing from SKF to accommodate radial and axial loads moving in either direction. Because its inner and outer raceways are offset, they can offer reliable support for combined loads. The ground transition from raceway to shoulder reduces edge stresses, which means the bearing can handle increased thrust loads. An enhanced crown cage design provides better ball guidance and reduces friction, allowing for a higher speed rating. At the same time, noise, vibration and heat generation are reduced. The result is a longer-lasting, high-performing bearing.
• Built from ultra-clean steel and heat-processed for enhanced hardness and durability
• Fibreglass reinforced nylon 66 (polyamide nylon) cage material offers greater self-lubricating capacity and higher elasticity
• Provides high-performance in a range of demanding industrial environments at temperatures up to +150°C
• Upgraded balls reduce lubricant consumption and help extend the life of the bearing
Applications
• Gears and transmission systems
• Fans and blowers
• Industrial pumps
Does this bearing pose any danger of electrostatic discharge?
No. This component has been thoroughly tested for quality and meets all British and European electrostatic discharge and safety standards.
관련된 링크들
- SKF 3200 A-2ZTN9/MT33 2 Row Ball Bearing - 10 mm ID, 30 mm OD 14 mm Race Width
- SKF 3207 A-2RS1TN9/MT33 2 Row Ball Bearing - 35 mm ID, 72 mm OD 27 mm Race Width
- SKF 3302 A-2RS1TN9/MT33 2 Row Ball Bearing - 15 mm ID, 42 mm OD 19 mm Race Width
- SKF 3205 A-2RS1TN9/MT33 2 Row Ball Bearing - 25 mm ID, 52 mm OD 20.6 mm Race Width
- SKF 3204 A-2RS1TN9/MT33 2 Row Ball Bearing - 20 mm ID, 47 mm OD 20.6 mm Race Width
- SKF 3206 A-2RS1TN9/MT33 2 Row Ball Bearing - 30 mm ID, 62 mm OD 23.8 mm Race Width
- SKF 3209 A-2RS1TN9/MT33 2 Row Ball Bearing - 45 mm ID, 85 mm OD 30.2 mm Race Width
- SKF 3210 A-2RS1TN9/MT33 2 Row Ball Bearing - 50 mm ID, 90 mm OD 30.2 mm Race Width