FAG 61860-M 1 Row Deep Groove Ball Bearing - 300 mm ID, 380 mm OD

Subtotal (1 unit)*

₩4,102,340.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2027년 1월 04일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩4,102,340.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
313-176
제조사 부품 번호:
61860-M
제조업체:
FAG
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

FAG

Inside Diameter

300mm

Product Type

Deep Groove Ball Bearing

Outside Diameter

380mm

Race Width

38mm

Cage Material

Brass

Race Material

Steel

End Type

Open

Number of Rows

1

Internal Clearance

Normal

Static Load Rating

206000N

Dynamic Load Rating

152kN

Series

618

Standards/Approvals

ISO 492:2023

Bore Type

Cylindrical

Limiting Speed

2900rpm

Bearing Type

Deep Groove

Race Type

Deep Grooved

Flange Outside Diameter

380mm

제외

COO (Country of Origin):
IT

Schaeffler 618 Series Deep Groove Ball Bearing, 380mm Outside Diameter, 300mm Inner Diameter - 61860-M


This deep-groove ball bearing is designed for radial load support in industrial rotating assemblies where a cylindrical bore and an open-end configuration are required. It employs a steel raceway and offers standard internal clearance suitable for general machinery installation. The component meets the dimensional and quality parameters set out in ISO 492:2023 and is intended for single-row applications operating at moderate rotational speeds.

Features and Benefits:


• Brass cage reduces friction and supports consistent ball spacing
• High static capacity of 206,000 N enhances load-bearing resilience
• Dynamic rating of 152 kN sustains fluctuating radial loads
• Limiting speed of 2,900 r/min accommodates moderate-speed shafts
• Open-end design simplifies assembly and lubrication access

Applications


• Suitable for heavy-duty industrial gearboxes
• Ideal for conveyor drive shaft installations
• Used with electric motor output shafts
• Can be used for pump and compressor bearings
• Suitable for flange-mounted rotating platforms

What bore type is provided for shaft fitting?


It has a cylindrical bore suited to standard journal shafts.

How many rows of balls does it contain?


It is manufactured as a single-row configuration for radial load focus.

What material composes the rolling element races?


The races are MADE from steel to deliver wear resistance.

What is the flange outside diameter specified?


The flange outside diameter measures 380 mm.

관련된 링크들