FAG 695-2Z-HLC 1 Row Deep Groove Ball Bearing - 5 mm ID, 13 mm OD
- RS 제품 번호:
- 312-894
- 제조사 부품 번호:
- 695-2Z-HLC
- 제조업체:
- FAG
Subtotal (10 units, in packs of 10)*
₩157,480.00
일시적 품절
- 2026년 11월 19일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
팩 | 한팩당 | 한팩당* |
|---|---|---|
| 1 + | ₩157,480.00 | ₩15,748.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 312-894
- 제조사 부품 번호:
- 695-2Z-HLC
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Inside Diameter | 5mm | |
| Product Type | Deep Groove Ball Bearing | |
| Outside Diameter | 13mm | |
| Race Width | 4mm | |
| Race Material | Bearing Steel | |
| Ball Material | Steel | |
| Cage Material | Steel Sheet Metal | |
| End Type | Shielded | |
| Number of Rows | 1 | |
| Static Load Rating | 430N | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 1.08N | |
| Series | 695-2Z-HLC | |
| Standards/Approvals | RoHS | |
| Bore Type | Cylindrical | |
| Limiting Speed | 63rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Deep Groove | |
| Flange Outside Diameter | 13mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Inside Diameter 5mm | ||
Product Type Deep Groove Ball Bearing | ||
Outside Diameter 13mm | ||
Race Width 4mm | ||
Race Material Bearing Steel | ||
Ball Material Steel | ||
Cage Material Steel Sheet Metal | ||
End Type Shielded | ||
Number of Rows 1 | ||
Static Load Rating 430N | ||
Internal Clearance CN | ||
Dynamic Load Rating 1.08N | ||
Series 695-2Z-HLC | ||
Standards/Approvals RoHS | ||
Bore Type Cylindrical | ||
Limiting Speed 63rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Deep Groove | ||
Flange Outside Diameter 13mm | ||
- COO (Country of Origin):
- CN
Schaeffler 695-2Z-HLC Series Deep Groove Ball Bearing, 5mm Bore Diameter, 13mm Outside Diameter - 695-2Z-HLC
This deep groove ball bearing is designed to support radial and axial loads in rotating assemblies where sealed operation and grease lubrication are required. It incorporates non-contact shields on both sides and a steel sheet-metal cage, offering maintenance‑friendly performance across a broad temperature range and standard internal clearance for typical industrial duty.
Features and Benefits:
• Steel sheet-metal cage reduces risk of cage deformation
• Sealed both sides prevents external contamination ingress
• Normal internal clearance CN allows controlled radial play
• Grease-filled for lifetime lubrication and low upkeep
• Rated dynamic load 1,080 N supports continuous radial stresses
• Operating temperature range −30°C to 120°C enables varied environments
• Sealed both sides prevents external contamination ingress
• Normal internal clearance CN allows controlled radial play
• Grease-filled for lifetime lubrication and low upkeep
• Rated dynamic load 1,080 N supports continuous radial stresses
• Operating temperature range −30°C to 120°C enables varied environments
Applications
• Suitable for Compact electric motors and small drives
• Ideal for precision instrumentation rotating shafts
• Used with handheld power tools requiring sealed bearings
• Can be used for conveyor idler rollers in light industry
• Used for hobbyist robotics and small automation axes
• Ideal for precision instrumentation rotating shafts
• Used with handheld power tools requiring sealed bearings
• Can be used for conveyor idler rollers in light industry
• Used for hobbyist robotics and small automation axes
What shaft and housing shoulder limits must be observed?
Minimum shaft shoulder diameter is 6.4 mm and maximum housing shoulder diameter is 11.6 mm.
How does the bearing perform at elevated temperatures?
Dimensional stability of rings is maintained up to 120°C and lubricant suitability extends operation to that limit.
What are the load ratings relevant to fatigue and static conditions?
The fatigue load limit is 17.5 N and the Basic static radial load rating is 430 N.
What rotational speed capability does it offer?
The limiting speed is 63,000 rpm for applications within the specified lubrication and temperature range.
관련된 링크들
- FAG 61805-2Z-HLC 1 Row Deep Groove Ball Bearing - 25 mm ID, 37 mm OD
- FAG 61903-2Z-HLC 1 Row Deep Groove Ball Bearing - 17 mm ID, 30 mm OD
- FAG 698-2Z-HLC 1 Row Deep Groove Ball Bearing - 8 mm ID, 19 mm OD
- FAG 61808-2Z-HLC 1 Row Deep Groove Ball Bearing - 40 mm ID, 52 mm OD
- FAG 683-2Z-HLC 1 Row Deep Groove Ball Bearing - 3 mm ID, 7 mm OD
- FAG 685-2Z-HLC 1 Row Deep Groove Ball Bearing - 5 mm ID, 11 mm OD
- FAG 694-2Z-HLC 1 Row Deep Groove Ball Bearing - 4 mm ID, 11 mm OD
- FAG 684-2Z-HLC 1 Row Deep Groove Ball Bearing - 4 mm ID, 9 mm OD