FAG 6303-2RSR-C3 1 Row Deep Groove Ball Bearing - 17 mm ID, 47 mm OD
- RS 제품 번호:
- 311-979
- 제조사 부품 번호:
- 6303-2RSR-C3
- 제조업체:
- FAG
Subtotal (1 unit)*
₩17,100.00
재고있음
- 226 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩17,100.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 311-979
- 제조사 부품 번호:
- 6303-2RSR-C3
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Product Type | Deep Groove Ball Bearing | |
| Inside Diameter | 17mm | |
| Outside Diameter | 47mm | |
| Race Width | 14mm | |
| Race Material | Steel | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Static Load Rating | 6500N | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 14400N | |
| Standards/Approvals | DIN 625-1 | |
| Series | 6303-2RSR-C3 | |
| Bore Type | Cylindrical | |
| Limiting Speed | 10200rpm | |
| Bearing Type | Deep Groove | |
| Flange Outside Diameter | 47mm | |
| Race Type | Deep Grooved | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Product Type Deep Groove Ball Bearing | ||
Inside Diameter 17mm | ||
Outside Diameter 47mm | ||
Race Width 14mm | ||
Race Material Steel | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Sealed | ||
Number of Rows 1 | ||
Static Load Rating 6500N | ||
Internal Clearance C3 | ||
Dynamic Load Rating 14400N | ||
Standards/Approvals DIN 625-1 | ||
Series 6303-2RSR-C3 | ||
Bore Type Cylindrical | ||
Limiting Speed 10200rpm | ||
Bearing Type Deep Groove | ||
Flange Outside Diameter 47mm | ||
Race Type Deep Grooved | ||
제외
- COO (Country of Origin):
- KR
Schaeffler 6303-2RSR-C3 Series Deep Groove Ball Bearing, 47mm Outside Diameter, 17mm Inside Diameter - 6303-2RSR-C3
This deep groove ball bearing is designed to support radial and moderate axial loads in rotating machinery where sealed, greased, low-noise operation is required. It operates across a wide temperature range and is suited to installations requiring dimensional stability and sealed protection on both sides.
Features and Benefits:
• Sealed both sides to retain lubricant and exclude contaminants
• C3 internal clearance to accommodate thermal expansion and shaft deflection
• Dynamic load capacity 14400 N to extend service intervals under radial loading
• Limiting speed 10200 r/min for high-speed rotational applications
• Steel cage and races reducing wear and preserving track geometry
• Fatigue limit 435 N to indicate endurance under fluctuating loads
• C3 internal clearance to accommodate thermal expansion and shaft deflection
• Dynamic load capacity 14400 N to extend service intervals under radial loading
• Limiting speed 10200 r/min for high-speed rotational applications
• Steel cage and races reducing wear and preserving track geometry
• Fatigue limit 435 N to indicate endurance under fluctuating loads
Applications
• Suitable for electric motors requiring sealed low-noise bearings
• Ideal for gearbox input shafts with high rotational speed demands
• Used with pumps operating across variable temperatures
• Can be used for conveyor rollers exposed to dust ingress
• Appropriate for machine tool auxiliary spindles needing dimensional stability
• Ideal for gearbox input shafts with high rotational speed demands
• Used with pumps operating across variable temperatures
• Can be used for conveyor rollers exposed to dust ingress
• Appropriate for machine tool auxiliary spindles needing dimensional stability
What lubrication is supplied and how does it affect maintenance?
The bearing is prefilled with low-noise ball-bearing grease formulated for bearings with an outer diameter up to 62 mm, which permits extended lubrication intervals.
What are the allowable operating temperatures for this bearing?
The bearing functions between −20 °C and 100 °C, reflecting the temperature limits of the grease and material stability.
How are ring dimensions stabilised for thermal exposure?
Rings are dimensional‑stabilised up to 120 ° to reduce dimensional change at elevated temperatures.
What mounting clearances are required at the shaft shoulder?
Minimum shaft shoulder diameter for mounting is 22.6 mm while maximum housing shoulder diameter is 41.4 mm as installation constraints.
Which tolerance and bore form are used for interchangeability?
The product uses a normal tolerance class PN and a cylindrical bore form Z for standard fits.
관련된 링크들
- FAG S6303-2RSR-FD>N 1 Row Deep Groove Ball Bearing - 17 mm ID, 47 mm OD
- FAG 62303-A-2RSR 1 Row Deep Groove Ball Bearing - 17 mm ID, 47 mm OD
- FAG 62303-A-2RSR-C3 1 Row Deep Groove Ball Bearing - 17 mm ID, 47 mm OD
- FAG S6303-2RSR-HLC 2 Row Ball Bearing - 17 mm ID, 47 mm OD
- Beco 6303BHTS-330 Deep Groove Ball Bearing - 17 mm ID, 47 mm OD
- Beco 6303-ZZBHTS280 Deep Groove Ball Bearing - 17 mm ID, 47 mm OD
- SNR 6303ZZ 1 Row Deep Groove Ball Bearing - 17 mm ID, 47 mm OD
- NSK 6303DDUC3 1 Row Deep Groove Ball Bearing - 17 mm ID, 47 mm OD