FAG 6312-C-2Z-C4 1 Row Deep Groove Ball Bearing - 60 mm ID, 130 mm OD

Subtotal (1 unit)*

₩163,720.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 11월 23일 부터 2 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩163,720.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
310-351
제조사 부품 번호:
6312-C-2Z-C4
제조업체:
FAG
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

FAG

Inside Diameter

60mm

Product Type

Deep Groove Ball Bearing

Outside Diameter

130mm

Race Width

31mm

Cage Material

Steel

End Type

Shielded

Number of Rows

1

Static Load Rating

52000N

Internal Clearance

C4

Dynamic Load Rating

89000N

Standards/Approvals

ISO 492:2023

Series

63

Bore Type

Cylindrical

Limiting Speed

6700rpm

Bearing Type

Deep Groove

Race Type

Deep Grooved

COO (Country of Origin):
DE

Schaeffler Series 63 Deep Groove Ball Bearing, 60mm Bore, 130mm Outside Diameter - 6312-C-2Z-C4


This deep groove ball bearing is designed for radial load applications requiring a single-row configuration with a cylindrical bore and shielded ends. It operates at high rotational speeds and is suited to installations where controlled internal clearance is necessary. The bearing conforms to recognised dimensional standards for interchangeability and includes a steel retainer for ball separation.

Features and Benefits:


• 89000 N dynamic load rating delivers enhanced operational load capacity
• 52000 N static load rating resists deformation under stationary loads
• C4 internal clearance accommodates thermal expansion during operation
• Steel cage reduces ball contact friction and maintains alignment
• 6700 rpm limiting speed supports high-speed rotation demands

Applications


• Suitable for electric motor and drive shaft assemblies
• Ideal for industrial gearbox bearing supports
• Used with conveyor rollers in manufacturing lines
• Can be used for pump and compressor bearing locations
• Suitable for precision rotating equipment in plant operations

What type of bore does it use for mounting?


It has a cylindrical bore intended for interference or slip fits depending on shaft preparation.

How does the shielded end affect maintenance requirements?


The shields limit contamination ingress, reducing lubrication replenishment frequency compared with open bearings.

What standard governs its dimensional tolerances?


It is manufactured to ISO 492:2023 dimensions and tolerance specifications.

How many rows of rolling elements are included?


The design incorporates a single row of balls for straightforward radial load support.

관련된 링크들