FAG 6317-2RSR-C3 1 Row Deep Groove Ball Bearing - 85 mm ID, 180 mm OD

Subtotal (1 unit)*

₩459,320.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2027년 1월 05일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩459,320.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
310-340
제조사 부품 번호:
6317-2RSR-C3
제조업체:
FAG
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

FAG

Inside Diameter

85mm

Product Type

Deep Groove Ball Bearing

Outside Diameter

180mm

Race Width

41mm

Cage Material

Steel

End Type

Sealed

Number of Rows

1

Internal Clearance

C3

Static Load Rating

97000N

Dynamic Load Rating

141000N

Series

63

Bore Type

Cylindrical

Standards/Approvals

ISO 492:2023

Limiting Speed

2350rpm

Race Type

Deep Grooved

Bearing Type

Deep Groove

제외

COO (Country of Origin):
DE

Schaeffler Series 63 Deep Groove Ball Bearing, 85mm Bore, 180mm Outside Diameter - 6317-2RSR-C3


This deep groove ball bearing is designed to support radial and moderate axial loads in rotating equipment. It features a sealed end construction and a cylindrical bore, suitable for installations where exclusion of contamination is required. The component conforms to current dimensional standards and is intended for applications demanding defined internal clearance and controlled rotational speed.

Features and Benefits:


• Single-row design provides straightforward installation and alignment
• C3 internal clearance allows for thermal expansion compensation
• Steel cage offers sustained structural support under load
• 141,000 N dynamic capacity enables sustained operational loads
• Sealed ends reduce ingress of contaminants during service

Applications


• Suitable for industrial drives with controlled rotational speed
• Ideal for gearboxes requiring sealed bearing arrangements
• Used with shafts requiring a cylindrical bore mounting
• Can be used for rotating assemblies subject to high dynamic loads

What is the bearing’s permitted rotational speed?


The limiting speed is 2,350 r/min, which defines the maximum recommended shaft speed for operation.

How does the bearing cope with static loads at standstill?


The static load rating is 97,000 N, indicating its capacity to withstand heavy stationary loads without permanent deformation.

What standard ensures dimensional interchangeability?


It is manufactured to ISO 492:2023, which governs geometry and tolerances for this type of component.

What materials and clearances affect thermal and mechanical performance?


The cage is MADE of steel and the internal clearance is specified as C3 to accommodate thermal growth and shaft-fit variations.

관련된 링크들