FAG 7220-B-XL-MP-UA 1 Row Angular Contact Ball Bearing - 100 mm ID, 180 mm OD 34 mm Race Width

This angular contact ball bearing is a single-row contact element designed to carry combined loads where axial and radial forces occur simultaneously. It operates at speeds up to 6,300 r/min and is suitable for installations requiring an unsealed configuration with predefined internal play. The bearing conforms to ISO 492:2023 dimensional standards.

• 142,000 N dynamic load rating delivers high load capacity for heavy-duty cycles
• 124,000 N static load rating supports sustained static loads without deformation
• Solid brass cage reduces wear and maintains ball guidance under load
• UA internal clearance allows controlled axial positioning and preload adjustment
• 34 mm race width improves stability under thrust and radial combinations

• Suitable for spindle assemblies requiring high axial capacity
• Used with machine tools needing controlled axial preload
• Ideal for rotary systems operating near 6,300 r/min
• Can be used for heavy-duty gearboxes with combined loading
• Used for precision indexers where standardised dimensions matter

It is supplied unsealed, allowing for external lubrication and contamination control tailored to the application.

The cage is MADE from solid brass to provide dimensional stability and Durable ball separation under load.

The 40° contact angle increases axial load capacity relative to lower angles while maintaining radial load support.

It follows ISO 492:2023 to ensure compatibility with standard housings and shafts.