사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	OEP
	Primary Impedance	600Ω
	Secondary Impedance	1.5 + 1.5 + 1.5kΩ
	Primary DC Resistance	83Ω
	Secondary DC Resistance	89Ω
	Dimensions	36 x 30 x 25mm
	Mounting Type	Through Hole
	Termination Type	PC Pin
	Weight	110g
	Depth	25mm
	Length	36mm
	Width	30mm
	Turns Ratio	1:1:1:1
	Minimum Operating Frequency	10Hz
	Isolation Voltage	500V
	Core Type	Laminated
	Maximum Operating Frequency	50kHz
	Maximum Temperature	+70°C
	Construction	Enclosed
	Minimum Temperature	-20°C

	모두 선택
	브랜드 OEP
	Primary Impedance 600Ω
	Secondary Impedance 1.5 + 1.5 + 1.5kΩ
	Primary DC Resistance 83Ω
	Secondary DC Resistance 89Ω
	Dimensions 36 x 30 x 25mm
	Mounting Type Through Hole
	Termination Type PC Pin
	Weight 110g
	Depth 25mm
	Length 36mm
	Width 30mm
	Turns Ratio 1:1:1:1
	Minimum Operating Frequency 10Hz
	Isolation Voltage 500V
	Core Type Laminated
	Maximum Operating Frequency 50kHz
	Maximum Temperature +70°C
	Construction Enclosed
	Minimum Temperature -20°C

OEP Splitting Transformer 1:1:1:1 600R Datasheet

COO (Country of Origin):: GB

OEP J30A09C Microphone Transformers

J30A09C microphone transformers from OEP are ideal for impedance matching and signal splitting. These audio transformers are fitted with an electrostatic screen and stray flux copper band. They are encapsulated in a mumetal screening can that ensures low distortion and reduces electrical noise by up to 30 dB. With drive up to +22 dBU these microphone transformers can split input into 3 signals (600 Ω).

4 H nominal inductance at 1 kHz, 0.1 V
675 μH leakage inductance (secondaries) at 1 kHz, 0.1 V
140 pF interwinding capacitance (primary to secondaries) at 20 kHz

수량	한팩당
1 - 9	₩132,006.08
10 +	₩122,767.76

Through Hole Audio Transformer 1.5 + 1.5 + 1.5kΩ

OEP J30A09C Microphone Transformers

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

관련된 링크들