- RS 제품 번호:
- 815-3509
- 제조업체:
- RS PRO
34 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 9 백 1개
₩100,946.323
Bag(s) | Per Bag | 한팩당* |
1 - 4 | ₩100,946.323 | ₩11,217.025 |
5 + | ₩83,079.809 | ₩9,231.665 |
*다른 단위에 대한 가격 표시 |
- RS 제품 번호:
- 815-3509
- 제조업체:
- RS PRO
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- GB
제품 세부 사항
RS PRO ESD Foam 305 mm width
This ESD foam from RS PRO prevents sensitive pins and components from getting damaged by electrostatic discharge (ESD). By inserting terminals in conductive foam like this one you bring all the terminals to the same charge level, so the device is protected from discharge.
Made from high-density (HD) polyether polyurethane, the 6 mm-thick foam is impregnated with rigid conductive latex and offers excellent 'pin insertion' properties, meaning it's well-suited for holding small devices in place. This feature is especially handy when packaging and transporting small and sensitive pieces of equipment – just push your component onto the foam so it stays in place without tumbling about. You can rest assured direct or vapour contact with the foam will not corrode non-ferrous metals such as zinc and nickel, even at raised temperatures or humidity.
The conductive foam's surface resistance complies with EN 61340-5, the recognised standard for ESD Protected Areas.
Made from high-density (HD) polyether polyurethane, the 6 mm-thick foam is impregnated with rigid conductive latex and offers excellent 'pin insertion' properties, meaning it's well-suited for holding small devices in place. This feature is especially handy when packaging and transporting small and sensitive pieces of equipment – just push your component onto the foam so it stays in place without tumbling about. You can rest assured direct or vapour contact with the foam will not corrode non-ferrous metals such as zinc and nickel, even at raised temperatures or humidity.
The conductive foam's surface resistance complies with EN 61340-5, the recognised standard for ESD Protected Areas.
Features and Benefits
RS PRO ESD foam
Made from high-density (HD) polyether polyurethane for excellent pin-insertion properties
Impregnated with rigid conductive latex
Protects non-ferrous metals from corrosion
Static shielding
Thickness of 6 mm
Length of 305 mm
Width of 305 mm
Tensile strength of 70 kPa
Volume resistance of
Made from high-density (HD) polyether polyurethane for excellent pin-insertion properties
Impregnated with rigid conductive latex
Protects non-ferrous metals from corrosion
Static shielding
Thickness of 6 mm
Length of 305 mm
Width of 305 mm
Tensile strength of 70 kPa
Volume resistance of
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
사양
속성 | 값 |
---|---|
Packaging Type | High Density ESD Foam |
Type | Foam |
Colour | Black |
Length | 305mm |
Thickness | 6mm |
Width | 305mm |
Dissipative | No |
Conductive | Yes |
Static Shielding | Yes |
Complies with EN 61340-5-1 | Yes |
Surface Resistance | 1 x 10^2 → ≤ 1 x 10^5Ω |
Volume Resistance | ≤ 2.5 x 10^2Ω |
Tensile Strength | 70kPa |