제조사부품번호

SMC Compressed Air Pipe Clear Polyurethane 10 mm 20 m TU Series

RS 제품 번호:: 686-2706
제조사 부품 번호:: TU1065C-20
제조업체:: SMC

SMC Compressed Air Pipe Clear Polyurethane 10 mm 20 m TU Series

모든 Air Hoses 열람하기

Subtotal (1 unit)*

₩121,000.00

일시적 품절

2026년 9월 21일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩121,000.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 686-2706
제조사 부품 번호:: TU1065C-20
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Product Type	Compressed Air Pipe
	Colour	Clear
	Material	Polyurethane
	Length	20m
	Maximum Operating Pressure	0.8 Mpa
	Application	Water, Air
	Series	TU
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	60°C
	Inside Diameter	6.5mm
	Outside Diameter	10mm
	Standards/Approvals	No

	모두 선택
	브랜드 SMC
	Product Type Compressed Air Pipe
	Colour Clear
	Material Polyurethane
	Length 20m
	Maximum Operating Pressure 0.8 Mpa
	Application Water, Air
	Series TU
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 60°C
	Inside Diameter 6.5mm
	Outside Diameter 10mm
	Standards/Approvals No

Datasheet TU1065C-20

COO (Country of Origin):: VN

SMC Series TU Compressed Air Pipe, 6.5mm Inside Diameter, 20m Length - TU1065C-20

This compressed Air pipe provides a clear, flexible conduit for conveying compressed Air and water in industrial settings. Constructed from polyurethane, it is supplied as a continuous 20 m length and is intended for use in automation, electrical, electronics and mechanical environments where visible flow and material resilience are required.

Features & Benefits

• Withstands up to 0.8 MPa to support moderate-pressure systems
• Rated for continuous use from -20°C to 60°C for varied climates
• Clear material permits Visual inspection of fluid flow and contamination
• Polyurethane composition offers abrasion resistance and flexibility
• 10mm outside diameter for convenient connection handling

Applications

• Suitable for pneumatic tool supply lines in assembly cells
• Ideal for routing compressed Air to sensors and valves
• Used with water blow-off stations in electronics cleaning
• Can be used for secondary Air distribution in machine frames
• Suitable for temporary compressed Air runs during maintenance

How does the tubing perform under temperature cycling in plant environments?

It retains dimensional stability across the -20°C to 60°C range, minimising stiffening in cold conditions and maintaining flexibility at elevated service temperatures.

What inspections can be carried out without disconnecting the line?

The transparent wall allows Visual checks for bubbles, particulates or water ingress while the system is live, aiding Rapid fault isolation.

How compatible is the material with standard push-fit pneumatic fittings?

The polyurethane wall thickness and 10mm outside diameter provide reliable grip for common push-fit connectors designed for a 6.5mm internal bore.

Can the tubing handle occasional pressure spikes above normal operating pressure?

The nominal maximum operating pressure is 0.8 MPa, so any transient peaks should be evaluated against that constraint and system safety factors.