Power Integrations, AC/DC Converter 2.5 A, 12V dc 12-Pin, eDIP-12B LNK6773V

모든 AC-DC Converters 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal (48 units, in tubes of 48)*

₩62,976.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 05일 부터 6,384 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
Per Tube*
48 - 48₩1,312.00₩63,024.00
96 - 144₩1,274.00₩61,142.00
192 +₩1,236.00₩59,300.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
146-2454
제조사 부품 번호:
LNK6773V
제조업체:
Power Integrations
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Power Integrations

Product Type

AC/DC Converter

Maximum Input Voltage

265V ac

Maximum Output Voltage

12V dc

Mount Type

Through Hole

Output Power

15W

Switching Frequency

32kHz

Pin Count

12

Maximum Output Current

2.5A

Package Type

eDIP-12B

Minimum Input Voltage

85V ac

Topology

Flyback

Maximum Duty Cycle

66%

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

150°C

Height

2.34mm

Series

LinkSwitch-HP

Width

8.89mm

Standards/Approvals

No

Length

10.16mm

Supply Current

1.3mA

Automotive Standard

No

COO (Country of Origin):
CN

LinkSwitch-HP series Offline AC-DC Converters


The Power Integrations LinkSwitch-HP family of flyback power supply ICs incorporate a primary side regulated controller and high-voltage power MOSFET in a single package. These devices feature ±5% CV accuracy, selectable current limit, programmable latching or hysteretic over-voltage, under-voltage and over-temperature protection, fast AC reset, and programmable shutdown delay time.

Package options:

• eSIP-7C package for vertical orientation with minimum PCB footprint size and simple heat sink mounting using clip or adhesive pad

• eSOP-12B package for low-profile surface mounted ultra-thin designs with heat transfer to PCB via exposed pad and SOURCE pins; both wave and IR reflow soldering supported

• eDIP-12B package for low-profile through-hole mounted ultra-thin designs with heat transfer to PCB via exposed pad or optional metal heat sink

• Multi-mode control maximizes efficiency over full load range

• No-load consumption below 30 mW at 230 VAC

• >75% efficiency with 1 W input at 230 VAC

• >50% efficiency with 0.1 W input at 230 VAC

• Dramatically simplifies power supply designs

• Eliminates opto-coupler and all secondary control circuitry

• ±5% or better output voltage tolerance

• 132 kHz operation reduces transformer and power supply size

• Compensation over line limits overload power

• Frequency jittering reduces EMI filter cost

• Fully integrated soft-start for minimum start-up stress

• Auto-restart limits power delivery to 3% during overload faults

AC-DC Converters, Power Integrations


관련된 링크들