TDK-Lambda 150W Power Brick AC/DC Adapter 16V dc Output, 9.38A Output

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩161,003.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 3 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 9₩161,003.20
10 - 49₩154,554.80
50 +₩148,125.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
125-3765
제조사 부품 번호:
DT-150PW-160-D
제조업체:
TDK-Lambda
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

TDK-Lambda

Adapter Type

Power Brick Adapter

Plug Type

C14

Output Voltage

16V dc

Input Voltage

90 → 264V ac

Output Current

9.38A

Maximum Temperature

+60°C

Input Connector

IEC 320-C14

Number of Outputs

1

Power Rating

150W

Cable Length

1050mm

Efficiency

89%

Standards Met

CSA 60950-1, EN 55022-B, EN 55024, EN 69501-1, FCC Class B, IEC 60950-1, UL

MTBF

140000h

Load Regulation

-5 → +5%

Energy Efficiency Level

VI

Series

DT150-D

Width

85mm

Minimum Temperature

-20°C

Depth

44mm

Length

170mm

COO (Country of Origin):
TW

TDK Lambda DT150-C Series 150W AC-DC External Desktop Power Supply


DT150-C series 150W AC-DC external desktop power supplies with a wide AC input range and an insulated, compact (85 x 170 x 44mm) lightweight enclosure. These 150W AC-DC external desktop power adapters are ErP Level V compliant, have an average efficiency of 87% and a low off load standby power consumption of less than 0.5W. The operating temperature range for these 150W AC-DC external desktop power supplies is 0 to +40°C at full load with no derating required. Typical uses for these 150W AC-DC external desktop power supplies include instrumentation and industrial device powering as well as other more general purpose applications.

Wide AC input range of 90 to 264 Vac
High average efficiency of 87%
ErP Level V compliance
Low standby power consumption of less than 0.5W
PFC typically 0.9 at full load (meets EN61000-3-2)
Operating temperature of 0 to +40°C at full load without derating
Overvoltage and short circuit protection
Low profile insulated case: 85 x 170 x 44mm
IEC 320-C14 input connector and 1050mm cable with moulded Kykon 4-pin connector
EMC compliance to EN55022-B, FCC Class B

Note

MTBF to MIL-HNBK (100% load, 25°C ambient)

Standards

Safety Class I, CSA/UL60950-1, EN609501-1, IEC60950-1

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.



Switch Mode - TDK Lambda

관련된 링크들