Duracell Duracell Plus Alkaline AAA Battery 1.5 V

현재 이용 불가
이 품목의 재입고 여부는 알 수 없으며 제조업체에서 단종되고 있습니다.

대체품

이 제품은 현재 공급 불가입니다. 아래 제품들은 당사에서 추천드리는 대체품입니다.

16 미터가 들어있는 1트레이

₩37,436.00

RS 제품 번호:
250-5080
제조사 부품 번호:
MN2400B16PLUS
제조업체:
Duracell
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Duracell

Product Type

AAA Battery

Series

Duracell Plus

Chemistry

Alkaline

Number of Batteries

16

Nominal Voltage

1.5V

IEC Code

LR03

NEDA Code

24 A

Termination Type

Flat

Battery Size

AAA

Diameter

10.50mm

Height

44.5mm

Standards/Approvals

ANSI, IEC

Weight

11g

제외

Duracell Plus Series AAA Battery, 10.50mm Diameter, 1.5V Nominal Voltage - MN2400B16PLUS


This AAA battery supplies 1.5V for portable devices, using alkaline chemistry to deliver steady power across varied loads. It is intended for applications requiring replaceable single-cell power and operates across a wide temperature span. Stored within recommended conditions, the cell offers practical service life examples varying by applied load and cut-off voltage.

Features and Benefits:


• 133m-ohm impedance at 1kHz for predictable voltage response
• Flat terminals enabling stable contact in battery holders
• Operates from -20°C to 54°C for extended temperature use
• High-rate capability up to 0.6A short bursts for demanding loads
• Typical mass 11g supporting lightweight product designs

Applications


• Suitable for remote controls and battery-powered toys
• Used with portable measuring instruments requiring stable voltage
• Ideal for handheld torches and LED penlights
• Can be used for wireless mice and keyboards
• Used for small electronic sensors and clocks

What storage conditions preserve cell performance?


Store between 5°C and 30°C to limit capacity loss and maintain typical delivered energy.

How does temperature affect discharge at 100mA?


Lower temperatures reduce service hours

comparative curves exist for -10°C, 0°C and 21°C conditions.

What resistance behaviour should be expected under load?


DC resistance varies with rate

low-rate and high-rate impedance ranges cover brief high-current pulses and steady drains.

How is delivered capacity defined for different uses?


Capacity depends on applied load, temperature and cut-off voltage, with discharge charts showing examples for constant current, power and resistance conditions.

관련된 링크들