현재 이용 불가
이 품목의 재입고 여부는 알 수 없으며 제조업체에서 단종되고 있습니다.
대체품
이 제품은 현재 공급 불가입니다. 아래 제품들은 당사에서 추천드리는 대체품입니다.
개당
₩65,851.50
- RS 제품 번호:
- 832-0618
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Material Type | Composite | |
| Product Type | 3D Printer Filament | |
| Printing Technology | Fused Deposition Modelling (FDM) | |
| Machine Specific | No | |
| Colour | Wood | |
| For Use With | Common Desktop 3D Printer | |
| Weight | 500g | |
| Diameter | 2.85mm | |
| Printing Material | Wood | |
| Printing Maximum Temperature | 235°C | |
| Printing Minimum Temperature | 205°C | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Material Type Composite | ||
Product Type 3D Printer Filament | ||
Printing Technology Fused Deposition Modelling (FDM) | ||
Machine Specific No | ||
Colour Wood | ||
For Use With Common Desktop 3D Printer | ||
Weight 500g | ||
Diameter 2.85mm | ||
Printing Material Wood | ||
Printing Maximum Temperature 235°C | ||
Printing Minimum Temperature 205°C | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- ES
RS 3D Printer Filament WOOD
WOOD is a modified PLA based type of filament, that smells and feels like wood. The filament is a bit brittle, but tough enough to be supplied in reels of 300 gram to 1kg. It prints easy, but we advise a slightly bigger nozzle to avoid blocking. Due to a low shrinkage factor WOOD will not deform after cooling. Poly Lactic Acid is a biodegradable plastic made from renewable natural resources and one of the most popular materials for 3D printing
Feels and smells like WOOD
Easy to print at low temperature
Very low warping
Biodegradable
Preferably printed with > 0.4mm nozzle
Once you’ve purchased your filament it’s important to store it correctly to maintain its quality. Over time the plastic will absorb moisture from the air, creating small water bubbles in the filament. These bubbles when heated in the extruder nozzle will quickly reach boiling point, spoiling the print. The use of desiccant dehumidifiers to absorb the moisture is highly recommend
Note
Due to its low tendency to warp WOOD can also be printed without a heated bed. If you have a heated bed the recommended temperature is ± 35-60ﾟC.
WOOD can be used on all common desktop FDM or FFF technology 3D printers.
We advise a nozzle > 0,4mm
Storage: Cool and dry (15-25ﾟC) and away from UV light. This enhances the shelf life significantly
WOOD can be used on all common desktop FDM or FFF technology 3D printers.
We advise a nozzle > 0,4mm
Storage: Cool and dry (15-25ﾟC) and away from UV light. This enhances the shelf life significantly
관련된 링크들
- RS PRO 2.85 mm Dark Wood Wood 3D Printer Filament, 500 g
- RS PRO 2.85 mm Light Wood Wood 3D Printer Filament, 500 g
- RS PRO 1.75 mm Wood Wood 3D Printer Filament, 500 g
- RS PRO 1.75 mm Light Wood Wood 3D Printer Filament, 500 g
- RS PRO 2.85 mm White 3D Printer Filament, 500 g
- RS PRO 2.85 mm Black PET-G 3D Printer Filament, 500 g
- RS PRO 2.85 mm Transparent PET-G 3D Printer Filament, 500 g
- RS PRO 2.85 mm White PET-G 3D Printer Filament, 500 g