Drills

Drills are used to make holes in materials as well as loosening and tightening screws and bolts. The main conscideration when selecting a drill is the type of material you will be drilling as harder materials will require higher power and additional features such as hammer action.


What type of drills are available?


  • Drill Drivers - Drill drivers combine two functionalities, drilling of holes and the driving screws into the hole. Most quality drills are equipped with user-defined speeds and torque settings to adapt to any job in hand. Drill drivers offer a lower torque setting offering a smooth screwing process.

  • Combi Drills - A Combi drill is a multi-purpose tool, with most having a keyless chuck to hold any drill bits. It can be used at high speed for drilling applications into a variety of materials such as masonry, woods, metals and plastics with the added functionality of hammer action. With the correct screw driving bit, you can drive screws in easily.

  • Impact Drill/Drivers - Offering similar characteristics to a drill driver however, it provides more torque and power for driving in screws and hex bolts. Impact drill/drivers typically only offer one gear, but great torque making it great if you do need to drill through tough knotty wood or metals.

  • Hammer Drills - Hammer drills increase the of force to the bit when being drilled. Similar princple to a jackhammer, driving the drill bit into the material. This action provides a greater force to harder materials such as stone and masonry.

  • SDS Drills - These are a more powerful version of a hammer drill and use a slotted drive system to increase the force for drilling and chiselling. Designed mainly to be used on hard materials such as concrete, stone and masonry and other heavy-duty applications.

  • Angle Drills - Angled drills have the functionality of a combi drill, but with a 90 degree bent head. Seen to compliment the combi, but for those hard to reach areas. The angled head allows for a smaller drill bit making it easier to drive screws or drill materials in a confined space.

  • Magnetic Drills - Mag Drills are essentially a portable bench drill for drilling metals. The base of the drill uses magnets to lock itself to the material so prevent it moving while drilling. Magnetic drills are most often used with annular cutters for an accurate cut.

...
Read more Read less

검색 필터링

총 224개 제품 중 1번째-20번째 제품을 조회 중
한장내 검색 결과 수
제품설명 단가 Drill Type Voltage Rating Type Battery Type Corded/Cordless Battery Capacity Brushed/Brushless Motor Series Chuck Size Chuck Type Drilling Capacity Masonry Drilling Capacity Metal Orientation Max Speed
RS 제품 번호 707-2835
제조사 부품 번호DCD710D2-GB
제조사DeWALT
₩271,273.25
Each
수량
Drill Driver 10.8V Drill Driver Li-ion Cordless 2Ah Brushed DCD 10mm Keyless - 10 mm Straight 1500rpm
RS 제품 번호 769-4031
제조사 부품 번호DCD985M2-GB
제조사DeWALT
₩851,952.85
Each
수량
Drill Driver 18V Combi Drill Li-ion Cordless 4Ah Brushed DCD 13mm Keyless 16 mm 13 mm Straight 2000rpm
RS 제품 번호 872-5631
제조사 부품 번호DHP458RF3J
제조사Makita
₩802,528.00
Each
수량
Drill Driver 18V Drill Driver Li-ion Cordless 3Ah Brushed DHP - Keyless 16 mm 13 mm Straight 2000rpm
RS 제품 번호 462-732
제조사NEUTRAL
₩761,439.05
Each
수량
- - - - - - - - - - - - - -
RS 제품 번호 812-9865
제조사 부품 번호GBH36V-EC COMPACT
제조사Bosch
₩884,519.90
Each
수량
Hammer Drill - - Li-ion Cordless 2Ah Brushless GBH - SDS Plus - 13 mm Straight -
RS 제품 번호 872-5640
제조사 부품 번호DHR242RMJ
제조사Makita
₩883,174.50
Each
수량
SDS Drill - - Li-ion Cordless 4Ah Brushed DHR242 - SDS Plus - 13 mm - -
RS 제품 번호 812-9881
제조사 부품 번호0.601.9A6.976
제조사Bosch
₩394,248.70
Each
수량
Drill Driver 10.8V - Li-ion Cordless 2Ah Brushed - 1/4mm Hex - - - -
RS 제품 번호 535-578
제조사 부품 번호DP4700/2
제조사Makita
₩361,422.80
Each
수량
Hammer Drill 240V Drill Driver - Corded - Brushed - 13mm - - 13 mm Straight -
RS 제품 번호 547-616
제조사RS PRO
₩35,079.60
Each
수량
Drill 6 → 18V dc PCB Drill - Corded - Brushed - - Collet - - Straight -
RS 제품 번호 113-8641
제조사 부품 번호06019G2170
제조사Bosch
₩580,251.80
Each
수량
Drill Driver 18V Combi Drill Li-ion Cordless 4Ah Brushed GSB 13mm Autolock 13 mm 13 mm Straight 1900rpm
RS 제품 번호 111-6730
제조사 부품 번호DHP482RFWJ
제조사Makita
₩416,117.65
Each
수량
Drill Driver 18V Combi Drill Li-ion Cordless 3Ah Brushed DHP 13mm Keyless 13 mm 13 mm Straight 1900rpm
RS 제품 번호 113-8657
제조사 부품 번호06112A3070
제조사Bosch
₩231,686.25
Each
수량
SDS Drill 240V - - Corded - Brushed - - SDS 68 mm 13 mm Straight -
RS 제품 번호 667-4048
제조사 부품 번호DHR202RMJ
제조사Makita
₩961,683.55
1 Kit
Kit(s)
SDS Drill - - Li-ion Cordless 3Ah Brushed BHR - SDS Plus - 13 mm Straight -
RS 제품 번호 826-8015
제조사 부품 번호DCD796P2-GB
제조사DeWALT
₩754,870.15
Each
수량
Hammer Drill - - Li-ion Cordless 5Ah Brushless XR Brushless 13mm Keyless - 13 mm Straight -
RS 제품 번호 111-6729
제조사 부품 번호DF333DWAE
제조사Makita
₩305,394.95
Each
수량
Drill Driver 10.8V Drill Driver Li-ion Cordless 2Ah Brushed - 10mm Keyless - 10 mm Straight 1700rpm
RS 제품 번호 769-4126
제조사 부품 번호D25133K-GB
제조사DeWALT
₩328,387.65
Each
수량
Hammer Drill 240V - - Corded - Brushed - - - 26 mm 13 mm Straight -
RS 제품 번호 812-9960
제조사 부품 번호DA331DZ
제조사Makita
₩148,951.90
Each
수량
Drill Driver 10.8V Angle Drill (Body Only) Li-ion Cordless - Brushed DA - Keyless - 10 mm Angled 800rpm
RS 제품 번호 812-9976
제조사 부품 번호DHR242Z
제조사Makita
₩386,415.00
Each
수량
SDS Drill - - Li-ion Cordless - Brushless BL - SDS Plus - 13 mm Straight -
RS 제품 번호 812-9910
제조사 부품 번호DHR263ZJ
제조사Makita
₩490,689.70
Each
수량
SDS Drill - - Li-ion Cordless 4Ah Brushed LXT - SDS Plus - 13 mm Straight -
RS 제품 번호 506-9543
제조사 부품 번호HP1631K/2
제조사Makita
₩177,320.00
Each
수량
Hammer Drill 230V - - Corded - Brushed - - - 16 mm 13 mm Straight -