Threading Taps

Threading taps are a tool used to create screw threads (tapping) into a pre-drilled hole, to create a clean fitting for bolts in metals and plastics. Used in engineering and manufacturing, threading taps work like a drill but due to the unique shape of a tap, when screwed into a piece of material, screw threads are created. Threading taps must be used in a predrilled hole and cannot be used for drilling entire holes.


The difference between taps and dies is that taps are used to create or repair threads in holes which is ideal for nuts. Dies are used to cut threads on materials such as steel rods to allow a fitting to be screwed on and attached (threading). The tap is designed for internal thread cutting, so this would be used on the fastener hole or a nut, whereas a die is used for the external thread, like on a bolt. In other words, tapping uses the tap part of the set and creates internal threads and threading is the process used by the die to cut external threads.


Threading Taps are available in HSS (high-speed steel) and carbide and can be used by hand or machine. Our range of threading taps offers the best tool for every machining method or process to meet all your requirements. Threading taps can be used with a tap wrench or power tool and are available in various sizes to accommodate a range of applications.


Taps can be used by machinists in different ways for different applications:


  • Taper taps or starter taps, are used to initially start a new thread with the first 7-10 threads having a flatter profile than those further up the shaft.

  • Plug taps are similar to taper taps but only have 3-5 starting rows ground down leaving more shaft to create a thread.

  • Bottom taps are square in profile with no ground down threads and are used after a taper or plug tap has been used. Their full length cutting shape allow for threads to be cut at the very bottom of a hole for maximum thread length.

  • Spiral flute taps – for blind hole applications

  • Spiral point taps – push chips forward, ideal for through-hole applications

  • Straight flute taps – most commonly, designed for short chipping materials

  • Forming taps – compresses to produce a thread rather than cutting

  • Taps come in both Metric and Imperial dimensions and can have different shank types. Threading taps are used in conjunction with a tap wrench so always consider the maximum side tap your wrench can hold when purchasing.

...
Read more Read less

검색 필터링

총 632개 제품 중 41번째-60번째 제품을 조회 중
한장내 검색 결과 수
제품설명 단가 Set Type Thread Size Type Pitch Thread Standard Thread Direction Number of Pieces Overall Length Shank Standard Hand/Machine Tap Material Shank Diameter Shank Type Ring Colour
RS 제품 번호 499-447
제조사 부품 번호4405930
제조사EXACT
₩86,164.50
1 Set
Set(s)
Threading Tap Set - - - - - 7 - - - HSS - - -
RS 제품 번호 668-1119
제조사RS PRO
₩211,776.50
1 Set
Set(s)
Hand Tap M12 Hand Tap - - - 22 - - - HSS - - -
RS 제품 번호 178-939
제조사 부품 번호7915 UNC
제조사Dormer
₩408,595.50
1 Set
Set(s)
Threading Tap Set - - - - - 22 - - - HSS - - -
RS 제품 번호 375-9323
제조사RS PRO
₩98,679.20
1 Set
Set(s)
Hand Tap, Tap Set M12 Hand Tap, Tap Set - - - 8 - - - HSS - - -
RS 제품 번호 469-3347
제조사 부품 번호7910 E500
제조사Dormer
₩109,688.85
1 Set
Set(s)
Straight Flute Tap M10 Straight Flute Tap - - - 6 - - - HSS - - -
RS 제품 번호 151-824
제조사RS PRO
₩34,092.25
1 Set
Set(s)
Straight Flute Tap M10 Straight Flute Tap - - - 2 - - - HSS - - -
RS 제품 번호 241-4108
제조사 부품 번호E500 8.0 X 1.25 3FL SET3
제조사Dormer
₩57,467.80
1 Set
Set(s)
Straight Flute Tap M8 Straight Flute Tap - - - 3 - - - HSS - - -
RS 제품 번호 509-0250
제조사 부품 번호10008
제조사EVENTUS
₩10,084.30
Each
수량
Hand Tap M4 Hand Tap - - - 3 - - - HSS - - -
RS 제품 번호 300-0233
제조사 부품 번호E513-M12/1,00
제조사Dormer
₩48,780.05
Each
수량
Threading Tap M12 Straight Flute 1.0mm Metric Fine Right Hand 1 89 mm - Machine Tap HSS 9 mm - -
RS 제품 번호 509-0200
제조사 부품 번호05903
제조사EXACT
₩17,056.20
Each
수량
Threading Tap M5 Combination 0.8mm Metric Right Hand 1 41 mm - - HSS 1/4 in - -
RS 제품 번호 215-546
제조사RS PRO
₩35,760.05
Each
수량
Hand Tap M10 Hand Tap - - - 3 - - - HSS - - -
RS 제품 번호 669-9404
제조사RS PRO
₩94,086.55
1 Set
Set(s)
Threading Tap Set - - - - - 12 - - - HSS - - -
RS 제품 번호 299-9176
제조사 부품 번호E207-M10
제조사Dormer
₩38,514.40
Each
수량
Threading Tap M10 Spiral Flute 1.5mm Metric Right Hand 1 100 mm - Machine Tap HSS-E 10 mm - -
RS 제품 번호 299-9514
제조사 부품 번호E237-M3
제조사Dormer
₩28,743.20
Each
수량
Threading Tap M3 Straight Flute 0.5mm Metric Left Hand 1 56 mm - Machine Tap HSS-E 3.5 mm - -
RS 제품 번호 389-2004
제조사 부품 번호45106
제조사Recoil
₩55,376.85
Each
수량
Threading Tap M10 Bottoming 1.5mm Metric - 1 - - - - - - -
RS 제품 번호 269-5515
제조사 부품 번호E100 6N8
제조사Dormer
₩48,267.00
Each
수량
Threading Tap Set M6 Straight Flute 1.0mm Metric Right Hand 3 56 mm - Hand Tap HSS 6 mm - -
RS 제품 번호 152-429
제조사RS PRO
₩15,676.70
1 Set
Set(s)
Straight Flute Tap 5/16 in UNC Straight Flute Tap - - - 2 - - - HSS - - -
RS 제품 번호 240-3041
제조사 부품 번호E500 2.0 X 0.40 3FL BOTT
제조사Dormer
₩26,774.70
Each
수량
Threading Tap M2 Plug, Straight Flute 0.4mm Metric Right Hand 1 41 mm - Machine Tap HSS 2.5 mm - -
RS 제품 번호 389-2032
제조사 부품 번호45126
제조사Recoil
₩64,917.10
Each
수량
Threading Tap M12 Bottoming 1.75mm Metric - 1 - - - - - - -
RS 제품 번호 152-053
제조사RS PRO
₩10,961.60
Each
수량
Threading Tap M3.5 Straight Flute, Taper 0.6mm Metric - 1 - - Hand Tap HSS - - -