- RS 제품 번호:
- 247-2990
- 제조사 부품 번호:
- VECUTC02GR09
- 제조업체:
- Delta Plus
24 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당
₩12,998.846
수량 | 한팩당 | 한팩당* |
12 + | ₩12,998.846 | ₩155,989.607 |
*다른 단위에 대한 가격 표시 |
- RS 제품 번호:
- 247-2990
- 제조사 부품 번호:
- VECUTC02GR09
- 제조업체:
- Delta Plus
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- CN
제품 세부 사항
The Deltaplus' SOFTnocut gloves are high performance fibre and nitrile reinforced gloves developed to be used for mechanical applications. This glove has Polyurethane coating on palm and fingertips, which adds to protection and life span of the gloves. It has reinforcement between the thumb and index finger. It has 10 cm cuff and gauge 15. These are size 9 gloves. Resistant to usual mechanical factors of concern like abrasion, cutting, puncture and tearing This glove is grey in colour STANDARDS: REGULATION (EU) 2016/425 EN ISO 21420:2020 General requirements EN388:2016+A1:2018 Protective gloves against mechanical Risks (Levels obtained on the palm) 4: Resistance to abrasion (from 1 to 4) X: Resistance to cutting (from 1 to 5) 4: Resistance to tear (from 1 to 4) 3: Resistance to puncture (1 to 4) C: Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F).
Resistant to usual mechanical factors of concern like abrasion, cutting, puncture and tearing
사양
속성 | 값 |
---|---|
Glove Size | 9, Large |
Primary Glove Application | Cut Resistant |
Glove Material | Polyurethane |
Main Colour of Glove | Grey |
Number of Gloves | 1Pair |
Glove Coating | Polyurethane |
EN388 Abrasion | 4 |
EN388 Cut - Coup Test | X |
EN388 Tear | 4 |
EN388 Puncture | 3 |
EN388 Cut - TDM-100 Test | C |
EN388 2016 | 4X43C |
EN374 Chemical | No |
EN407 Thermal | No |
EN511 Cold | No |
American Safety Standard | ANSI-ISEA 105:2016 A3 |
Complies with EN 61340-5-1 | No |