John Drummond MTL10 Voltage Indicator & Proving Unit Kit 3.5mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit

  • RS 제품 번호 706-8586
  • 제조사 부품 번호 MTL10/PD
  • 제조업체 John Drummond
참조 문서
제정법과 컴플라이언스
제외
COO (Country of Origin): PH
제품 세부 사항

Drummond MTL10 Test Lamp and Proving Unit Safety Kit

Voltage level indicator & proving unit safety kit comprising:

MTL10 Drummond Test Lamp

Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V

PD440 Proving Unit:

Essential to check the MTL10 for correct operation prior to working on electrical circuits
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)

Supplied with

Handy carry case, right angled probe tip, two straight tips and instructions

Mains Voltage Indicators - Contact

사양
속성
Model Number MTL10
Test Current Rating 3.5mA
Output Voltage 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc
Kit Contents Case, Martindale PD440 440V Proving Unit, MTL10 Test Lamp
Power Source Mains
Dimensions 213 x 112 x 72mm
Weight 320g
Height 72mm
Length 213mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Width 112mm
7 <재고있음> 5-9영업일내 홍콩 발송
단가 Each
289,031.60
(exc. VAT)
수량
한(1)개당
1 +
₩289,031.60