Infineon CY7C65215A-32LTXI, USB Controller, 3Mbps, I2C, SPI, UART, USB, 1.71 to 5.5 V, 32-Pin QFN

대량 구매 할인 기용 가능

Subtotal (1 pack of 3 units)*

₩16,880.52

Add to Basket
수량 선택 또는 입력
재고있음
  • 210 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
3 - 120₩5,626.84₩16,882.40
123 - 243₩5,502.76₩16,506.40
246 +₩5,382.44₩16,149.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
181-8299
제조사 부품 번호:
CY7C65215A-32LTXI
제조업체:
Infineon
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Infineon

Number of Transceivers

1

Data Rate

3Mbps

Protocols Supported

I2C, SPI, UART, USB

IC Type

Controller IC

Power Supply Type

Single

ESD Protection

Yes

Typical Single Supply Voltage

1.71 to 5.5 V

Mounting Type

Surface Mount

Package Type

QFN

Pin Count

32

Dimensions

5 x 5 x 0.9mm

Height

0.9mm

Length

5mm

Maximum Operating Temperature

+85 °C

Width

5mm

Minimum Operating Temperature

-40 °C

COO (Country of Origin):
US
Full-Speed (12 Mbps)
Support for communication driver class (CDC), personal health care device class (PHDC), and vendor device class
Integrated USB termination resistors
Two-channel configurable UART interfaces
CY7C65215 supports 2-pin, 4-pin and 6-pin UART interface whereas CY7C65215A supports 2-pin, 4-pin, 6-pin and 8-pin UART interface
Data rates up to 3 Mbps
190 bytes each transmit and receive buffer per channel
Data format:
7 or 8 data bits
1 or 2 stop bits
No parity, even, odd, mark, or space parity
Supports parity, overrun, and framing errors
Supports flow control using CTS, RTS, DTR, DSR
Supports UART break signal
CY7C65215 supports dual channel RS232/RS422 interfaces whereas CY7C65215A supports RS232/RS422/RS485 interfaces
Two-channel configurable SPI interfaces
Data rate up to 3 MHz for SPI master and 1 MHz for SPI slave
Data width: 4 bits to 16 bits
256 bytes for each transmit and receive buffer per channel
Supports Motorola, TI, and National SPI modes
Two-channel configurable I
2C interfaces
Master/slave up to 400 kHz
Supports multi-master I2C
256 bytes for each transmit and receive buffer per channel
CapSense®
SmartSense™ Auto-Tuning is supported through a
Cypress-supplied configuration utility
Max CapSense buttons: 8
GPIOs linked to CapSense buttons
Applications
Medical/healthcare devices
Point-of-Sale (POS) terminals
Test and measurement system
Gaming systems
Set-top box PC-USB interface
Industrial
Networking
Enabling USB connectivity in legacy peripherals

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들