- RS 제품 번호:
- 195-2479
- 제조사 부품 번호:
- NB7NPQ1002MMTTWG
- 제조업체:
- onsemi
2990 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당가격(10개가 1팩안에)
₩2,873.683
수량 | 한팩당 | 한팩당* |
10 - 740 | ₩2,873.683 | ₩28,736.834 |
750 - 1490 | ₩2,801.238 | ₩28,017.551 |
1500 + | ₩2,758.115 | ₩27,586.326 |
*다른 단위에 대한 가격 표시 |
- RS 제품 번호:
- 195-2479
- 제조사 부품 번호:
- NB7NPQ1002MMTTWG
- 제조업체:
- onsemi
제정법과 컴플라이언스
제품 세부 사항
The NB7NPQ1002M is a high performance single−Port linear redriver designed for USB 3.1 Gen 1 and USB 3.1 Gen 2 applications that supports both 5 Gbps and 10 Gbps data rates. Signal integrity degrades from PCB traces, transmission cables, and inter−symbol interference (ISI). The NB7NPQ1002M compensates for these losses by engaging varying levels of equalization at the input receiver, and flat gain amplification on the output transmitter. The NB7NPQ1002M offers programmable equalization and flat gain to optimize performance over various physical mediums. The NB7NPQ1002M contains an automatic receiver detect function which will determine whether the output is active. The receiver detection loop will be active if the corresponding channels signal detector is idle for a period of time. The channel will then move to Unplug Mode if a load is not detected, or it will return to Low Power Mode (Slumber mode) due to inactivity. Both the channels are independent with individual controls.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
사양
속성 | 값 |
---|---|
Number of Transceivers | 2 |
Data Rate | 10Gbit/s |
IC Type | Controller IC |
Protocols Supported | USB 3.1 |
Power Supply Type | Single |
ESD Protection | Yes |
Typical Single Supply Voltage | 3.3 V |
Mounting Type | Surface Mount |
Package Type | WQFN |
Pin Count | 30 |
Dimensions | 4.6 x 2.6 x 0.75mm |
Height | 0.75mm |
Length | 4.6mm |
Maximum Operating Temperature | +85 °C |
Minimum Operating Temperature | -40 °C |
Width | 2.6mm |