United Automation, DMFC12 230VAC, Thyristor Trigger Module, 24V ac, 4 → 400Hz, 11-Pin, 122 x 70 x 56mm

  • RS 제품 번호 669-6020
  • 제조사 부품 번호 DMFC12 230VAC
  • 제조업체 United Automation
참조 문서
제정법과 컴플라이언스
COO (Country of Origin): GB
제품 세부 사항

Dual Mode Firing Circuit, DMFC12

The DMFC12 is a single phase or phase-to-phase trigger module with the option of Phase Angle or Burst Fire Control, or a combination of the two i.e. start up in phase angle and then continue in burst firing.

Standard Din Rail mount
Phase Angle and Burst Fire Control, or Combination of both
Soft-Start 0-30 seconds adjustable
Current limit (using external CT/Hall-effect device)
Enable input (volt-free)
0-5V/0-10V, 0-20mA/4-20mA or potentiometer input signal
24Vdc or 18-24Vac supply
Output power span and zero adjustment

The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.

Input Voltage DC 24V dc
Input Voltage AC 24V ac
Mounting Type DIN Rail
Pin Count 11
Dimensions 122 x 70 x 56mm
Length 122mm
Height 56mm
Maximum Input Logic Voltage 8V
Width 70mm
Maximum Operating Frequency 400 Hz
Maximum Operating Temperature +70 °C
Minimum Operating Frequency 4Hz
5 <재고있음> 5-9영업일내 홍콩 발송
단가 Each
(exc. VAT)
1 - 4
5 - 9
10 +