RS PRO Test Probe Lead 2.5A, 50 V ac, Black, 500 mm Lead Length
- RS 제품 번호:
- 668-4572
- Distrelec 제품 번호:
- 303-91-122
- 제조업체:
- RS PRO
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩4,794.00
재고있음
- 1,151 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩4,794.00 |
| 5 + | ₩3,948.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 668-4572
- Distrelec 제품 번호:
- 303-91-122
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Product Type | Test Probe Lead | |
| Lead Length | 500mm | |
| Test Lead Type | 4 mm Connector Test Lead | |
| Connector Orientation A | Straight | |
| Current | 2.5A | |
| Colour | Black | |
| Connector Stackable A | Yes | |
| Voltage | 50 V ac | |
| Connector Stackable B | Yes | |
| Connector Orientation B | Straight | |
| Connector Gender A | Male | |
| Connector Gender B | Male | |
| Contact Material | Brass | |
| Standards/Approvals | UL 94 V-0 | |
| Insulation Material | Polyvinyl Chloride | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Product Type Test Probe Lead | ||
Lead Length 500mm | ||
Test Lead Type 4 mm Connector Test Lead | ||
Connector Orientation A Straight | ||
Current 2.5A | ||
Colour Black | ||
Connector Stackable A Yes | ||
Voltage 50 V ac | ||
Connector Stackable B Yes | ||
Connector Orientation B Straight | ||
Connector Gender A Male | ||
Connector Gender B Male | ||
Contact Material Brass | ||
Standards/Approvals UL 94 V-0 | ||
Insulation Material Polyvinyl Chloride | ||
- COO (Country of Origin):
- CN
RS PRO Stackable Test Leads
This Test Lead from our RS PRO own brand comes with 4mm banana plug at each end which is ideal for earth and continuity measurements.
Features and Benefits
•The inline stackable plugs offer additional versatility
• PVC (Polyvinyl Chloride) insulated lead which is flame retardant
• Current Rating of 2.5 A
• Voltage Rating of 50 Vac
• Insulation Material UL94V-0 PVC
Safety first!
Due to being an integral part of the complete measurement system, worn or under-rated test leads can cause inaccurate readings and pose a serious shock or electrocution hazard if live wires are read as being de-energized, therefore always remember to:
1. Check that your meter and test accessory safety ratings meet or exceed the voltage level you plan to test
2. Inspect your test leads before use to ensure the insulation is not nicked or cracked from age (aim to replace your test lead after 18 months)
3. Look for gaps or tears at the junction between the insulated wire and banana plug or probes on both ends of the lead
4. Run a straightforward ohms measure to confirm that your tools are electrically reliable and carry a signal within the allowance for loss parameters
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
관련된 링크들
- RS PRO Test Probe Lead 2.5A, 50 V ac, Red, 500 mm Lead Length
- Hirschmann Test & Measurement Test Probe Lead 32A, 300 V ac/dc, Black, 80 mm Lead Length
- Hirschmann Test & Measurement Test Lead 32A, 1000 V ac/dc, Black, 500 mm Lead Length
- Hirschmann Test & Measurement Test Probe Lead 32A, 1000 V, Black, 2 m Lead Length
- Hirschmann Test & Measurement Test Probe Lead 32A, 1000 V, Black, 1 m Lead Length
- Hirschmann Test & Measurement Test Probe Lead 32A, 300 V, Black, 80 mm Lead Length
- Hirschmann Test & Measurement Connector Test Lead 16A, 1000 V ac/dc, Black, 500 mm Lead Length
- Hirschmann Test & Measurement Connector Test Lead 10A, 1000 V ac/dc, Black, 500 mm Lead Length