FLUKE-725/9102/RS Drywell Calibrator, 24mA dc, 0 → 30V dc
- RS 제품 번호:
- 536-990
- 제조사 부품 번호:
- FLUKE-725/9102/RS
- 제조업체:
- Fluke
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
- RS 제품 번호:
- 536-990
- 제조사 부품 번호:
- FLUKE-725/9102/RS
- 제조업체:
- Fluke
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Fluke | |
| Thermocouple Type | B, E, J, K, L, N, R, S, T, U | |
| Width | 152mm | |
| Weight | 1.8kg | |
| Height | 100mm | |
| Model Number p | 725 | |
| Dimensions | 175 x 152 x 100mm | |
| Length | 175mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Fluke | ||
Thermocouple Type B, E, J, K, L, N, R, S, T, U | ||
Width 152mm | ||
Weight 1.8kg | ||
Height 100mm | ||
Model Number p 725 | ||
Dimensions 175 x 152 x 100mm | ||
Length 175mm | ||
- COO (Country of Origin):
- US
Fluke 725 & 9102S Drywell Temperature Calibrator Kit
Drywell Calibration Kits comprising the Fluke 725 process calibrator and 9102S drywell heat source
725 features
Two separate channels; measure, source and view process signals simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
9102S features
Contact temperature calibration over a range of -10°C to 122°C
A stable and uniform heat source
Fast to change temperature to set point with short stabilization times
Accuracy to 0.25°C and stability to 0.05°C
Removable insert sleeves supplied allow various diameter probes to be accommodated
A stable and uniform heat source
Fast to change temperature to set point with short stabilization times
Accuracy to 0.25°C and stability to 0.05°C
Removable insert sleeves supplied allow various diameter probes to be accommodated
Supplied with
725 process calibrator, test leads/clips, protective yellow holster; 9102S drywell, batteries, 9102S power Cord, RS-232 Cable, 9930 Interface-it Software.
Fluke 725 Drywell Calibration Kits
The Fluke 725 Drywell Calibration Kits couples the Fluke 725 with a highly portable and compact drywell heat source with a saving over buying the products separately.,The kit offers a rugged, handheld solution for the accurate calibration of temperature sensors and troubleshooting of process control instrumentation.