TDK, SPM, 6530 Shielded Wire-wound SMD Inductor with a Metallic Magnetic Core, 2.2 μH ±20% Wire-Wound 8.4A Idc

RS 제품 번호:: 831-9466
제조사 부품 번호:: SPM6530T-2R2M
제조업체:: TDK

TDK, SPM, 6530 Shielded Wire-wound SMD Inductor with a Metallic Magnetic Core, 2.2 μH ±20% Wire-Wound 8.4A Idc

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

본 제품군 열람하기

일시 품절-다음 입고 날짜는 02/10/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.

추가완료!

장바구니 보기

단가 개당가격(5개가 1봉지안에)

₩1,419.593

수량	한팩당	Per Bag*
5 - 245	₩1,419.593	₩7,101.413
250 - 495	₩1,362.671	₩6,816.805
500 - 1245	₩1,307.474	₩6,533.921
1250 +	₩1,278.151	₩6,390.755
*다른 단위에 대한 가격 표시

RS 제품 번호:: 831-9466
제조사 부품 번호:: SPM6530T-2R2M
제조업체:: TDK

참조 문서

SPM6530 Datasheet_EN

제정법과 컴플라이언스

제품 세부 사항

SPM6530 Series Magnetically Shielded Wire Wound Inductors

SPM6530 Series magnetic shield type wound inductor for power circuits use a metallic magnetic material
SPM6530 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coils
They have a low-profile with maximum heights of 1.2mm and 3.0mm allowing for different usages
Possible to achieve large current, low Rdc, and compactness
Low inductance variance in high-temperature environments with good DC superimposition characteristics"

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.

TDK Non Standard SMT Inductors (Chokes)

사양

속성	값
Inductance	2.2 μH
Maximum DC Current	8.4A
Package/Case	6530
Length	7.1mm
Depth	6.5mm
Height	3mm
Dimensions	7.1 x 6.5 x 3mm
Shielded	Yes
Tolerance	±20%
Maximum DC Resistance	19mΩ
Series	SPM
Core Material	Metallic Magnetic
Maximum Operating Temperature	+125°C
Inductor Construction	Wire-Wound
Minimum Operating Temperature	-40°C