WAGO Jumpflex Series Signal Conditioner, Current/Voltage Input, Current Output, 24V dc Supply, IECEx/ATEX
- RS 제품 번호:
- 180-3042
- Distrelec 제품 번호:
- 110-51-892
- 제조사 부품 번호:
- 857-423
- 제조업체:
- WAGO
Subtotal (1 unit)*
₩763,680.00
재고있음
- 11 개 단위 배송 준비 완료
- 추가로 2026년 10월 01일 부터 9 개 단위 배송
- 추가로 2026년 10월 08일 부터 12 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩763,680.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 180-3042
- Distrelec 제품 번호:
- 110-51-892
- 제조사 부품 번호:
- 857-423
- 제조업체:
- WAGO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | WAGO | |
| Product Type | Signal Conditioner | |
| Input Signal Type | Current/Voltage | |
| Output Signal Type | Current | |
| Isolation | 2.5kV ac | |
| Output Range | 0 → 20 mA | |
| Supply Voltage | 24V dc | |
| Hazardous Area Certification | IECEx/ATEX | |
| Mount Type | DIN Rail | |
| Terminal Type | Push-in Cage Clamp | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 70°C | |
| IP Rating | IP20 | |
| Signal Conditioner Type | Signal Splitter | |
| Standards/Approvals | EN 61000-6-4, EN 61000-6-2, CE | |
| Series | Jumpflex | |
| Number of Channels | 2 | |
| 모두 선택 | ||
|---|---|---|
브랜드 WAGO | ||
Product Type Signal Conditioner | ||
Input Signal Type Current/Voltage | ||
Output Signal Type Current | ||
Isolation 2.5kV ac | ||
Output Range 0 → 20 mA | ||
Supply Voltage 24V dc | ||
Hazardous Area Certification IECEx/ATEX | ||
Mount Type DIN Rail | ||
Terminal Type Push-in Cage Clamp | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 70°C | ||
IP Rating IP20 | ||
Signal Conditioner Type Signal Splitter | ||
Standards/Approvals EN 61000-6-4, EN 61000-6-2, CE | ||
Series Jumpflex | ||
Number of Channels 2 | ||
- COO (Country of Origin):
- DE
WAGO Signal Conditioner, DIN Rail Mounting, 6mm Width - 857 Series - 857-423
Do you need to convert, amplify, filter or isolate analogue signals in a flash? This signal conditioner from WAGO will do all that multitasking for you. You can configure it to control temperature, voltage, current or frequency to suit the demands of your setup. Thanks to its three-way isolation, you don't have to compromise on accuracy due to noise, crosstalk or unwanted ground loop currents. The device features a unit gain amplifier, so you can rest assured it transmits an accurate, high-quality signal, even from the smallest of units.
Features & Benefits
• Input voltage range of 0 to 10V for use in low-power systems
• IP20 rating means it's finger-safe and protected against objects larger than 12mm
• Safe for use in harsh environments, thanks to its wide operating temperature range between -25°C and +70°C
• Light weight of 40.6g to minimise strain on your equipment
Applications
• Military electronics
• Energy management systems
• Industrial processes
Is this signal conditioner easy to install?
Yes, you can mount it in a snap onto a standard DIN rail for convenient installation.
관련된 링크들
- WAGO JUMPFLEX Isolation Amplifiers Series Signal Conditioner, Current Input, Current Output, IECEx, ATEX
- WAGO Jumpflex Series Signal Conditioner, Voltage Input, Current/Voltage Output, 24V dc Supply, ATEX, IECEx
- WAGO 857 Series Signal Conditioner, Current Input, Current/Voltage Output, 24V dc Supply, IECEx, ATEX
- WAGO 857 Series Signal Conditioner, Current Input, Current/Voltage Output, 24V dc Supply, ATEX, IECEx
- WAGO 857 Series Signal Conditioner, Current Input, Current/Voltage Output, 24V dc Supply, IECEx/ATEX
- WAGO 857 Series Signal Conditioner, Current/Voltage Input, Current/Voltage Output, 24V dc Supply, IECEx/ATEX
- WAGO 857 Series Signal Conditioner, Current Input, Voltage Output, 24V dc Supply, IECEx, ATEX
- WAGO 857 Series Signal Conditioner, Voltage Input, Current Output, 24V dc Supply, ATEX, IECEx