제조사부품번호

Pilz PSWZ X1P, 24V ac/dc, 240 V ac/dc Safety Relay, 2 Safety Contacts, 1

RS 제품 번호:: 489-6394
Distrelec 제품 번호:: 304-23-246
제조사 부품 번호:: 777949
제조업체:: Pilz

Pilz PSWZ X1P, 24V ac/dc, 240 V ac/dc Safety Relay, 2 Safety Contacts, 1

Subtotal (1 unit)*

₩1,100,443.50

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량	한팩당
1 +	₩1,100,443.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 489-6394
Distrelec 제품 번호:: 304-23-246
제조사 부품 번호:: 777949
제조업체:: Pilz

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Pilz
	Product Type	Safety Relay
	Safety Contacts	2
	Number of Auxiliary Contacts	1
	Mount Type	DIN Rail
	Power Consumption	5VA
	Series	PSWZ X1P
	Terminal Type	Screw
	IP Rating	IP20
	Standards/Approvals	RoHS
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	55°C
	Width	45mm
	Height	121mm
	Length	94mm
	Hazardous Area Certification	No
	Safety Category	PLe Category 4
	Coil Voltage	24, 240V ac/dc

	모두 선택
	브랜드 Pilz
	Product Type Safety Relay
	Safety Contacts 2
	Number of Auxiliary Contacts 1
	Mount Type DIN Rail
	Power Consumption 5VA
	Series PSWZ X1P
	Terminal Type Screw
	IP Rating IP20
	Standards/Approvals RoHS
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 55°C
	Width 45mm
	Height 121mm
	Length 94mm
	Hazardous Area Certification No
	Safety Category PLe Category 4
	Coil Voltage 24, 240V ac/dc

COO (Country of Origin):: FR

PSWZX1P Safety Relay by PILZ

The PSWZX1P range of safety relays from PILZ offers you safety and performance all in one. The PSWZX1P offers you different modes of operation such as single or dual channel switches. Suitable specifically for operating your safe standstill machinery or tools that are deemed dangerous or hazardous to health.

Features and benefits:

• DIN rail mounted with screw terminals

• LED display that offers you the following measures:

- Supply voltages

- Standstill on Channel 1 / 2

- Switch status

- Fault signal if simultaneity time is exceeded

• Semiconductor output signal (input for reset function):

- Error

- Switch status

• Measure inputs for single or three-phase motors

• Measuring voltage is selectable

• Feedback loop is in operation

• Plug in connection terminals is possible

Safety features:

• Relays K1 & K2 are interlocked specifically designed so that the unit cannot be switched back on in the case of contact welding or an open circuit (ensuring your safety at all times)

• The unit will monitor and measure and look out for an open circuit. If the circuit does open, the unit will immediately switch itself off to prevent hazards

• The standstill motor which is unique to the PSWZ X1P prevents the plant from being enabled, in the following cases:

- Power supply failure

- Component failure

- Measuring circuits are open circuit

- Coil deflect / open circuit

Applications:

• Safe standstill monitoring – this is the units main purpose and is specifically designed for safe standstill where areas of operation such as plants have dangerous machinery or tools in use. Safe standstill monitoring is only detected on power free measuring circuits. Any residual voltages, induced voltages or drives with in the position control will prevent the relay from its main function so take this into consideration when in use

Technical safety parameters:

• EN 60204-1
• EN 62061
• EN ISO 13849-1
• EN ISO 14119
• VDE 0113-1

Approvals

BG, UL, CUL

Standards

VDE 0113; EN 60204-1; IEC 204-1