- RS 제품 번호:
- 191-3823
- 제조사 부품 번호:
- HK2030-ZW
- 제조업체:
- INA
일시 품절-다음 입고 날짜는 25/06/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
단가 개당
₩15,379.208
수량 | 한팩당 |
1 - 12 | ₩15,379.208 |
13 - 24 | ₩14,765.144 |
25 + | ₩14,451.212 |
- RS 제품 번호:
- 191-3823
- 제조사 부품 번호:
- HK2030-ZW
- 제조업체:
- INA
참조 문서
제정법과 컴플라이언스
제품 세부 사항
Are particularly suitable for applications with a very small radial section height on account of their very low cross-sectional height
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
사양
속성 | 값 |
---|---|
Inside Diameter | 20mm |
Outside Diameter | 26mm |
Roller Bearing Type | Drawn Cup Needle |
Race Width | 30mm |
Bore Type | Parallel |
Static Load Rating | 40000N |
Cage Material | Sheet Steel |
Number of Rows | 1 |
Dynamic Load Rating | 21800N |
End Type | Sealed |
Fatigue Limit Load | 5100N |