Telemecanique Sensors Inductive Rectangular Proximity Sensor, 40 mm Detection, PNP NO+NC, 12 → 48 V dc
- RS 제품 번호:
- 221-1725
- Distrelec 제품 번호:
- 303-04-351
- 제조사 부품 번호:
- XS8C4A4PCM12
- 제조업체:
- Telemecanique Sensors
Subtotal (1 unit)*
₩254,382.80
일시적 품절
- 2026년 2월 02일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩254,382.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 221-1725
- Distrelec 제품 번호:
- 303-04-351
- 제조사 부품 번호:
- XS8C4A4PCM12
- 제조업체:
- Telemecanique Sensors
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Telemecanique Sensors | |
| Sensor Technology | Inductive | |
| Detection Range | 40 mm | |
| Body Style | Rectangular | |
| Digital Switching Output Type | PNP | |
| Output Function | NO+NC | |
| Connection Type | M12 | |
| Supply Voltage | 12 → 48 V dc | |
| Length | 117mm | |
| IP Rating | IP65, IP67, IP69K | |
| Mounting Type | Non-Flush | |
| Maximum DC Voltage | 48V | |
| Minimum Operating Temperature | -25°C | |
| Depth | 40mm | |
| Shielding | Unshielded | |
| Switching Current | 200 mA | |
| Maximum Operating Temperature | +70°C | |
| Series | XS | |
| Switching Frequency | 200 Hz | |
| Maximum Switching Frequency | 200Hz | |
| 모두 선택 | ||
|---|---|---|
브랜드 Telemecanique Sensors | ||
Sensor Technology Inductive | ||
Detection Range 40 mm | ||
Body Style Rectangular | ||
Digital Switching Output Type PNP | ||
Output Function NO+NC | ||
Connection Type M12 | ||
Supply Voltage 12 → 48 V dc | ||
Length 117mm | ||
IP Rating IP65, IP67, IP69K | ||
Mounting Type Non-Flush | ||
Maximum DC Voltage 48V | ||
Minimum Operating Temperature -25°C | ||
Depth 40mm | ||
Shielding Unshielded | ||
Switching Current 200 mA | ||
Maximum Operating Temperature +70°C | ||
Series XS | ||
Switching Frequency 200 Hz | ||
Maximum Switching Frequency 200Hz | ||
- COO (Country of Origin):
- FR
The Schneider Electric XS series inductive proximity sensor is solely for the detection of metal objects. It basically comprises an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metal object is placed within the magnetic field generated by the sensor, the resulting currents induced form an additional load and the oscillations cease. This causes the output driver to operate and, depending on the sensor type, a normally open (NO) or normally closed (NC) output signal is produced.
Device application Mobile equipment
Body type Fixed
Detector flush mounting
acceptance
Non flush mountable
Material Plastic
Enclosure material PBT
Type of output signal Discrete
Wiring technique 4-wire
Discrete output function 1 NO + 1 NC
Output circuit type DC
Body type Fixed
Detector flush mounting
acceptance
Non flush mountable
Material Plastic
Enclosure material PBT
Type of output signal Discrete
Wiring technique 4-wire
Discrete output function 1 NO + 1 NC
Output circuit type DC